Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Haas rigid tapping feedrate format confusion


Charlie Pierson
 Share

Recommended Posts

We have a new Haas VF2ss with a next-gen control.

I am confused as to which feedrate format to use ( ipm or ipr ? ) .

Is the feedrate value dependent upon G94 or G95 ?

Is there a default format ?

An internet search mentioned using a G99 for ipr on a Haas lathe, but this is a mill.

Haas 'help' on control or pdf of the mill manual was of little help as some example programs used ipr and others used ipm.(w/out showing feedrate mode of control)

Thanks in advance

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...