Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Drill point selection in 2020


PAnderson
 Share

Recommended Posts

Yesterday, for the third time, I was picking hole centers and or points for drilling and the drill toolpath would only let me select 24 points. Then it just will not let me select any more. I tried numerous times. I would delete all points, then start over, no go. I tried window selecting, only 24 would be picked. Is there now some kind of limit? I ended up doing multiple toolpaths.

 

Paul

Link to comment
Share on other sites
48 minutes ago, PAnderson said:

They changed the pick interface for 2020. But his was happening in one session and when I saved and reopened the next day, it was working properly. Now, I have no clue. This wasn't the first time I had this happen in 2020. 

This is the first I've heard of it.. If you can figure out steps to reproduce please send it in!  I haven't been able to replicate it on my side while playing.

Link to comment
Share on other sites

If you cant select certain holes maybe they are exactly over top of one another and if so you will need to turn off the depth filter shown in the image below. This is exactly what cementhead recommended but his screen shot was from an older version but i think he was right about this potentially causing the problem.

1.jpg

 

Link to comment
Share on other sites
On 7/19/2019 at 1:35 PM, JoshC said:

If you cant select certain holes maybe they are exactly over top of one another and if so you will need to turn off the depth filter shown in the image below. This is exactly what cementhead recommended but his screen shot was from an older version but i think he was right about this potentially causing the problem.

1.jpg

 

Yes this the problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...