Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

VMC 4 axis feed not correct


RICARDO_GOMES
 Share

Recommended Posts

From the calculations i did real quick, The feeds are close to a machine running non cylindrical/polar tool paths (g107/g112..etc) on a 26.054 diameter part.

When we have operators question the feed rates on our lathes during a milling operation, we use the attached pdf to give a general idea of how the post calculates the correct feed to match ipm/diameter/..etc.

If the machine does use a cylindrical/polar tool path, then the f1000. that you have programmed would be seen as f1000.

Hope this helps some.

 

feed rate for rotary tables.pdf

  • Like 1
Link to comment
Share on other sites
17 hours ago, RLeuschen said:

From the calculations i did real quick, The feeds are close to a machine running non cylindrical/polar tool paths (g107/g112..etc) on a 26.054 diameter part.

When we have operators question the feed rates on our lathes during a milling operation, we use the attached pdf to give a general idea of how the post calculates the correct feed to match ipm/diameter/..etc.

If the machine does use a cylindrical/polar tool path, then the f1000. that you have programmed would be seen as f1000.

Hope this helps some.

 

feed rate for rotary tables.pdf

Thank you.

However, feeds for rotary paths are never posted on a knowledgeably way . Today i have found the arc filter/tolerance afecting it all the way. Problem is, i never know the values that will be posted and have to try tenths of times to adjust all the tool feeds and arc filter/tolerance until it gets aceptable values. It should exist a easyear way to do this.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...