2D Chamfer Problems

[Lazarusman]

Howdy, Lazarusman here again. I'm trying to program a 2D chamfer that makes multiple stepover passes, but I can't seem to figure out how to do that. Every time I run it in simulation, it doesn't stepover. Any advice would be greatly appreciated.

Thank you,

Lazarusman

[#Rekd™]

Look at the backplot details (X, Y, Z coordinates as you step along) to see what the toolpath is doing.

You are using the multiple passes option within the toolpath?

 

[Lazarusman]

1 hour ago, #Rekd™ said:

Look at the backplot details (X, Y, Z coordinates as you step along) to see what the toolpath is doing.

You are using the multiple passes option within the toolpath?

 

The tool is following the boundaries set by the geometry. It just goes around, with no stepovers. And yes, I'm using the multiple passes option within the toolpath. I know these machines are capable of doing what I want, I'm just not sure how to get it to do it. lol

[htm01]

a file would probably help

[#Rekd™]

3 minutes ago, htm01 said:

a file would probably help

+1000!

[Leon82]

Do you have a combination of depth steps and multipasses and machine finish at final depth?