Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

saving operations


Doug Funny
 Share

Recommended Posts

Greetings all,

Is there a way to save and recall operations? For instance, tapped holes that you want to spot, drill, tap and countersink. Can these be saved together as a single operation and recalled as opposed to copying an operation for each individual process?

Link to comment
Share on other sites

And unless you do aerospace, military, etc work, where they get anal about your tap chamfer size/angle, just spot the hole a little deeper in the first place so that you'll have a chamfer when the hole is done. No need to chamfer later, unless your spot drill isn't big enough.

If you happen to use a 120 degree spot drill, you can use the web app that I made to calculate your spot depth.  http://spot-calc.thadseaver.com  ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...