Post Generic Fanuc 5X Router.pst axis exchange

[M Drechsler]

 

Hello
My name is Michael I live in Germany.
I am new to this forum. I have a problem or a question. Is it possible to exchange the axes in the postprocessor Generic Fanuc 5X Router.pst?
The post office gives me C and B out.
But I need C and A.
Have a homemade portal milling machine.
Maybe someone can help me.
Many Thanks..
Greetings Micha

[JParis]

Has your reseller tried to help?

What did they say?

[M Drechsler]

 

I bought the machine six years ago.
I do not know where to ask questions?

 

 

[JParis]

The person that sold you your seat of Mastercam...

[gcode]

This would be a good place to start

https://www.mastercam.de/

[M Drechsler]

 

I can not contact this Verkäfer of the machine any more ..

[gcode]

20 minutes ago, M Drechsler said:

 

I can not contact this Verkäfer of the machine any more ..

You do not need to contact the machine builder,

your Mastercam reseller is where you need to go to get help with your post processor

[Colin Gilchrist]

1 hour ago, M Drechsler said:

 

Hello
My name is Michael I live in Germany.
I am new to this forum. I have a problem or a question. Is it possible to exchange the axes in the postprocessor Generic Fanuc 5X Router.pst?
The post office gives me C and B out.
But I need C and A.
Have a homemade portal milling machine.
Maybe someone can help me.
Many Thanks..
Greetings Micha

Hi Michael,

Mastercam is not a "free" program. My guess is that you picked up a "bootleg" copy of the software, which means you are using an illegal copy. You would need to purchase a legitimate copy of the software for us to be willing to help you on this forum. Although there are servers on the internet where people are willing to help each other break the law, this is not one of those places

[M Drechsler]

Hello

Could not timely answers only have three messages a day ..

this is very bad.
I always assumed that everything is fine.
I have X3 and no documentation.
What should I do now?
I would like to buy Mastercam but I can not afford that.
Unfortunately I tried to reach the seller of the machine today without success.
He sold me the machine and the controller with Mastercam (private).
Did I make myself punishable now?
It is a pity, but I do not want to continue this way.
I will remove Mastercam X3 from my computer.
That's a pity but probably not otherwise.

Greetings Micha