Won't post entire group of toolpaths into one file

[NickMyles]

So, I think this is unusual, or maybe I'm a newb. This is the first time I've run into this problem which leads me to believe I accidentally changed something without knowing. I'm selecting several toolpaths to post for my program. Mastercam wants to post one of my toolpaths by itself, it wont post with the rest of the group. What did I mess up here?

Thanks

Nick

[CJep]

double check the NC file name

to fix it select all yer tpaths, right click in the operation manager (where all the tpaths reside) and select edit selected operations, change NC file name

then try to repost

[NickMyles]

That's it! Thanks very much!

Nick

[JoshC]

7 minutes ago, NickMyles said:

That's it! Thanks very much!

Nick

if you go to file-->config-->toolpath manager you can also set your NC file naming to "last operations nc file name" so that way you don't run into this problem again.

[Leon82]

This happens if you make the program on one workstation and add more paths on another sometimes.

[jesse_a_b]

Mastercam 2024 here, I tried everything and there's no way to solve it, it only posts one of the operations.

[crazy^millman]

13 hours ago, jesse_a_b said:

Mastercam 2024 here, I tried everything and there's no way to solve it, it only posts one of the operations.

Are they in different machine groups? Can you show a screen shot of the operations Manager?

[cruzila]

I usually do the file name AND program number prior to posting as a habit. I copy OPs a lot and that does not change the file name.

[gcode]

This should work

Select all operations

right click 

select edit operations/Change NC Filename

also 

select all the toolpaths

then

Select Files and set your output folder

It you don't have ASK and Edit  enabled in the Post Dialog, it may be posting one operation 

and sending the rest somewhere else.