ROTATING MODEL ON A 32.5 DEGREE ANGLE

[MACHINIST1695]

Not really sure what to ask but Is there a way to rotate the model to the 32.5 degrees?  I have to mill a slot on a 32.5 degree angle, and need to orientate the model before choosing a new WCS,  when I go to rotate it only wants to rotate off the X axis..  using a 3 axis haas mill running mastercam x9. Still fairly green to programming and have been teaching myself off videos< and the forum. thanks   

 

WELP NEVER MIND. IM A DUMMY. I FIGURED IT OUT. THANK YOU.

[PinkBunchan]

I use dynamic transform to do stuff like this. you should be able to input a degree value if you rotate using the gnomon. Select one of the segments bordering an axis line and type in your angle and it should rotate correctly.