Small file eating Ram

[Tinger]

Hello all,

This is a small file/part, but when I verify the 2nd OP and set my precision to over 50%, my computers ram usage spikes up to 100% and I don't why.

I haven't changed STL/Verify tolerances from what I normally use. My computer has 16gb of ram but I have done parts that are significantly more complex with much larger part/file sizes with no issue.

So I was wondering if someone could take a look and see a setting or something that is goofed up in this file. Or does this file not take up 16gb for you?

Wherestheram.ZIP

[ajmer]

not sure if this is the issue but i created a pmesh from the last stock model in operation 1

then i created a stock model from that in the 2nd machine group

then it seemed to work not too slowly

the other thing is that you dont have to have 2 machine groups for this

especially if it is the same machine

[Tinger]

Did this file take up 16gbs for you?

[ajmer]

it did eat a lot of ram

but when i changed to the way i mentioned above it didnt 

[Tinger]

13 minutes ago, ajmer said:

it did eat a lot of ram

but when i changed to the way i mentioned above it didnt 

Thank you for your help!