Generic Haas VF_TR 5X MIll / change B to C in post

[Jespertech]

Good afternoon, I'm wondering if it would be possible to alter my 5 axis post to output "C" for the table on the trunion instead of "B"? I've been manually editing my posts to fix this issue but like most of my problems here I'm sure I'm just a few clicks away from saving myself all sorts of time.

[MSL]

You need to Change your rotary settings inside your post.

# --------------------------------------------------------------------------
# 5 Axis Rotary Settings
# --------------------------------------------------------------------------
#Assign axis address
str_pri_axis : "B"          <------------- change this to  str_pri_axis : "C"   
str_sec_axis : "A"
str_dum_axis : "C"