Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Parameter# for TRANSFORM OPERATION PARAMETERS


Recommended Posts

Hello everyone, 
   Suddently, I am running productions of which using TRANSFORM TOOLPATH.  I have found a good place for my own work and I would like to know what are the parameters number of them.  I have looked and I guess I have X3, X4 PARAMETER PDF.  No luck.  Would you guys please tell me what are the parameters as I marked red.

 

I/O for OFF CUSTOM PARAMETERS
Integers (A, B, C, D) parameters and Real parameters (E, F, G, H)

 

Thank you...

Capture.thumb.JPG.1f27af7434479c1a74f02609bb9b5605.JPG

Link to comment
Share on other sites

I'm not 100% sure these will work in 2020, I recall having some issues gathering information from transform ops.

  • 15870             -> Are misc. ops on
  • 15774-15777 -> Custom integers 1-4
  • 15778-15781 -> Custom reals 1-4 

You should also reach out to your reseller and request the 2020 post docs.  They are now in a html format rather than the .pdf; I find the new format much easier to work with.   

  • Thanks 1
Link to comment
Share on other sites
2 hours ago, jeff.D said:

I'm not 100% sure these will work in 2020, I recall having some issues gathering information from transform ops.

  • 15870             -> Are misc. ops on
  • 15774-15777 -> Custom integers 1-4
  • 15778-15781 -> Custom reals 1-4 

You should also reach out to your reseller and request the 2020 post docs.  They are now in a html format rather than the .pdf; I find the new format much easier to work with.   

Thank you Jeff

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...