robodrill

[Bama]

Tried looking to see if this had already been discussed no luck. I have a post for a RoboDril  fanuc 31i. I think when the machine was installed they asked the installer or applications guy to change how it look at the B axis as far as how it read . Wether it be a letter B or A. they wanted it to read A. my question is is there somewhere in the post where  we can change it to read A instead of B. not sure why they requested it other than to make it like our Mazak machines so it wouldn't be confusing for the operators. Thanks in advance

[Frank Caudillo]

Do you have an example of code that is currently posting and that same code edited to how you want it to post out? Pretty sure this could be an easy fix.

[Bama]

N2
G49 T2 M06  (1/2 6 FLUTE EM E3105)
G00 G90 G17 G54
G00 B0. C0.
M10
M68
G08 P1

N2
G49 T2 M06  (1/2 6 FLUTE EM E3105)
G00 G90 G17 G54
G00 A0. C0.
M10
M68
G08 P1

The top one is how it is now. The bottom one is the way I want it with the A & B swapped out.

[Bama]

Got it it was actually in the machine def