Work shift offset issue

[Threept82]

Good Morning All,

We have two different horizontal machines.

One works fine, the other... not so much.

We have a job that needs two work offsets. G55 & G56.

One machine posts out great the other posts out the same but will not post the G56 at rotation, it remains at G55.

The machines are different and comparing the posts is useless due to the differences.

Any thoughts would be appreciated.

Thanks. 

 

 

 

[Mgrenier]

Activate the post debugger.  Post with the right machine to see where in the post the G56 gets output to the Nc file.  Then place it accordingly on the other post.

[gcode]

Look on the misc page of post that won't output rotations

mpmaster posts have a switch that forces one WO output

# mi9 - Lock on First WCS - Set in first operation
#        0 = No
#        1 = Yes

This is set on the Misc page of each operation.. if it's set to one by default, that is your problem

 

[Matthew Hajicek - Singularity]

Your Mastercam dealer might be willing to fix that for free or for a nominal fee.  Mine will handle small tweaks like this for free.