Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Machine ran out of travel and now wont move...


Recommended Posts

Hello all,

I have a DNM5700. While I was tapping it ran out of Z travel, it alarmed out. But now I cant get It to move. I tore down my setup around it and removed the part. Nothing is in the way. I shut the machine down and restarted it, but it is still stuck in a z over travel alarm. If anyone has an idea of how to get this thing to move, it would be appreciated... 😁

Link to comment
Share on other sites

The machine is brand new. What happened was it was in a tapping cycle while it ran out of travel. So it alarmed out and would not recover until I forced it out of the tapping recover feature in the digital relays in the controller. It was trying to recover the tap, but couldn't because the overtravel alarm wouldn't let it move.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...