Sign in to follow this  

Amada Laser

Recommended Posts

We have an Amada laser and are trying to figure a few things out with programming it. We tried to use the M98 call to make a grid macro cutout but that ran into excess memory errors. So we are trying the subprogram approach. This is what we tried.


Main program


G92 X0. Y0.

G65 P0165 L10



Sub program.

G90 X0. Y0.

Laser on





G92 X0. Y2.625



We keep getting the machine stuck on the G99 line of code. It doesn't return to the top of the subprogram in the new starting location that is incremental Y2.625 to the new start point. I don't know Fanuc controllers that well only Haas.


On the Haas lathes I do a G10 W-1. at the end of the program to get the same effect but i get very confused about g92.


Is g92 absolute from the 1st one or incremental?


Most videos talking about it stop after the 2nd part, but what about the 3rd part.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us