I started with Version 3.1 on an IBM desktop like G with a 10 Meg hard drive and 5 1/4 then 31/2 floppies. I met Meghan when she was about 16 in Florida at an ACTE educational show. Before I left the company I was with to work for the Ohio reseller, we had 28 copies of Mastercam running within the engineering group.

Hey Terry, is Carl still running the IT department there?

Try using the Windows 10 mail client? I have my gmail, my msn, and another e-mail client all running thru it w/o any issues

Window select an area that appears to be blank, If it shows you have entities selected, change the color of the selected entities.

Good to hear you are growing Troy! I'm doing some part time programming since I retired and like it that way. Best of luck to you. Todd

Make sure it doesn't have a different file name for posting

The tablet Josh mentioned above was a Surface RT. Didn't do very well. My Dell Venue Pro with I5 processor does fine with Mill Level 1 type work. You need to remember it is a tablet I-5 processor and not a desktop. Graphic were fine.

Used to have an UNFOLD c-hook back in about Version 8 (not X8)

My profile still mentions Fastech, but I retired the first of the year. I still do some contract programming here and there.

Pretty sharp of you Cathedral.

themachinist, you can access the Raster to Vector process by pressing the Alt-C key combination in Mastercam. Scroll down and select Ras2vec as the C-Hook to run. HTH

I had a customer here in NW Ohio with several Roders doing precise machining for intricate injection molds and other work. Programs them all with Mastercam and has for years w/o any issues.

Good suggestion Tom.

Jayson Kramer in Santa Clarita does a lot of training on Mastercam. There are also colleges or high schools that do training in the area.

What are the spec's on your system?