^^^Haas FTW!!!!

X+ is available for download for Mastercam 2018 http://gmccs.de/downloads_x+.php

Go to 55 seconds in for the crazy!

Good tip, thanks

What did your Reseller say when you contacted them for help?

Also, don't forget that these kinematic offsets will need to be adjusted in the machine parameters for those that use TCP for everything.

Yes, I'd simply setup a Global Formula at the top of the Post to control the output values. I would only recommend doing this for 3X or 4X Positioning work. It *may* work for 4X or 5X continuous, but there are a bunch of other calculations that are happening internally, so I wouldn't trust it for 4X/5X work without a good review. First, create a new Format Statement in the Post. (put it below the others) fs2 30 0.9 0.9 #Format 9 decimal places for Metric Conversion Then, add these codes, at the top of your post, starting in the first column: met_conv : 0.039370078 fmt "" 30 met_conv xout = xout * met_conv yout = yout * met_conv zout = zout * met_conv arcrad$ = arcrad$ * met_conv iout = iout * met_conv jout = jout * met_conv kout = kout * met_conv