What I have used for the last 13 years.

Have that also. Great for Screen shots and quick Videos.

I prefer Camtasia.

I'm attempting yet again to force myself to acclimate to the new interface. In 2021, how do you turn off that annoying "glow" highlighting that washes everything out and keeps you from seeing exactly what you're selecting? Thanks

Just smile, and say "the four P's". Proper Preparation = Perfect Performance.

Some of the parts we make programs for cannot get that hot due to stress issues. They are strictly forbidden due to part failures of past parts where that happened. 50-60 year legacy on things makes some companies weary of even rethinking using tools like this. Can only image getting HST toolpaths used on this material. That has only taken 3 years to finally get a test going. On the machine broaching was a fun conversation with flight directors, heads of engineering and other groups. Made the test part and when they put it all together I get the strange looks and begin ask how did you do that? I was not sure what they meant and they asked about the finished height. I told them I could only hit it with a 1/4 turn of the thread. They went yeah you said that, but hit them with .001" of the nominal. Is that a problem? No, but how? I will take dumb luck any day of the week if that is a good enough answer for you.

Where you have to understand shop rate and ROI processes to understand what are the gains with using tools like this. Shop rate of $60/hr probably not going to see an advantage using these tools. Shop rate of $475/hr going to see it real quick.

We have Snagit here at work. Works okay.

My active post is always ENSHU HORIZONTAL.PST. I add what I'm going to do because if I find an issue six months later it will be easier to find the change and know what is was before the change. # *********** removed stool_detect_test from HX300iG 2019-05-17 ************ # if (t$ = 4 & (cantext$ = 52 | mi2count = 1))| t$ <> 4, if (t$ = 4 & (cantext$ = 52 | mi2count = 1))| t$ <> 4 | t$ <> 4 & machine <> 300, # ************************************************************************** # ******** replaced for systems 41 thru 44, 3112 thru 3712 2015-11-15 ****** if (sav_mi2 = 41 | sav_mi2 = 42 | sav_mi2 = 43 | sav_mi2 = 44 | sav_mi2 = 3112 | sav_mi2 = 3612 | sav_mi2 = 3712| sav_mi2 = 311290 | sav_mi2 = 361290 | sav_mi2 = 371290) & cantext$ = 54 & cantext_54 = 0, # ****altered prv_xabs & prv_yabs to force X & Y locations******2017-11-27** [ n$,"#900=#181+", no_spc$, *workofs$, e$ prv_xabs = c9k prv_yabs = c9k ] else, if cantext$ = 54 & cantext_54 = 0, [ n$,"#900=#539+", no_spc$, *workofs$, e$ prv_xabs = c9k prv_yabs = c9k ] # ************************************************************************** # **************************************************************************

OSG Ceramic Endmills > 6, 8, 10, 12 mm https://www.osg.co.jp/en/products/endmill/index.html But, they are not cheap!!!

Well I know some foundaries but not sure if they deal with this stuff or not. I am thinking you might be looking at something like a forging verse a Casting. Here is a company I have used in the past for crazy stuff. Specality Steel & Forge 26 Law Drive Fairfeild, NJ 07004 1-201-808-8300 www.steelforge.com And for you guys looking for exotic stuff here is a good contact also. Admiral Steel 4152 West 123rd Street Alsip, Illinos 60803 1-800-323-7055 www.admiralsteel.com They have Damascus as well as other knife blade Steel. HTH

Or you could look at it as the 7 P's Proper Planning and Preparation Prevent Pi$$ Poor Performance