So with some sweat equity and aid from reseller i was able to understand the workflow and process to achieve desired result. and here is what the turret looks like now. Thanks everyone for the help.

X22 running on the machine in my siggy.. purchased in Dec 2019 3 min 26 seconds

I can think of at least 20 different controls I have ran. I've ran every machine configuration from manual to CNC. All the way up to 8 axis and some swiss machines. I have just been thrown back on a Mazak after 10 years of not running one and I just had to come here and blow off some steam. I really hope the Mazak engineers are reading! We have a Mazak Nexus 510C-II. The door only opens to about 6" left of center of the spindle. Trying to lean in and see an indicator on the left side of a part is near impossible. And trying to reach your head far enough to see the indicator while your hand is on the jog handle looks ridiculously stupid. So you have to use the remote handwheel and a mirror. But then, the light in the machine is on the right side. So your indicator is in a shadow on the left side of the machine. So you need a flashlight. Now you have a flashlight and a mirror in one hand, the handwheel in the other and guess what??? You need to depress a button on the side of the handwheel to move the machine. So now I need a third hand. So I place my oil covered mini-maglight in my mouth, a mirror and the handwheel are being held with my hands, and I still can't see a ####### thing! This is by far the most ridiculous machine I have ever ran! Don't even get me started on the control LOL Whew, I feel better!

altamontmfg is correct, please see below:

Thanks Colin, I've got some reading to do. I thought you and I had spoken about this before, but I wasn't able to find our messages. I will talk to the decision makers about Verisurf after I reach out to VF and do some research.

YOU CAN FLIP THE ROTARY DIRECTION IN THE MACHINE DEFINITION