Give this a look at.

Björn, What version of Mastercam? Are you wanting to do this with a C-Hook or NET-Hook type add-in? *You cannot do it directly using the the NET-Hook API, but with a C++/CLI interop DLL, a NET-Hook "client" add-in can obtain this information.

I don't understand why the wording needs to change on some things such as, when you right click in the operations manager in 2021 and I believe all releases before, you have the "select" function. In 2022 you still have it only they now named it "Operation Selection". Operation Selection is more clear on it's function at a glance than "select" is alone but I'm right clicking in the operations manager. What else would I be selecting in there other than operation related things ? Also the greyed out folders drives me nuts. I understand why they did it though. If they could make the stock model always be it's own color and not grey that would help it stand out when you have stock models buried in a lot of toolpaths. Folders were yellow and stock models were grey. They stood out nicely. Can we please change this ( not to yellow or a different shade of grey either) ? P.S. please tell me there is setting for this somewhere. hahahah Thank you!

That is extremely deep and complex conversation. Do a search for these topics on the forum in the last 18 years and see what comes up. Then go search 4 or 5 other forums about this topic and then we can go from there. There are well over 100 brands of machines that can use these. In that depending on the builder can be 10 to 300 different models of machines that have it. Then add material, tooling, work holding and 20 other factors to that conversation and we start getting into the middle of where the conversation can go. Now think about all the different controls out there and how they did and currently support things. It gets really deep really quick. Narrow it down to a specific machine, control, holders and material and what options it has then it might get to a start.

Hello eM, For which applications and types of machines is it better to use G93 instead of G94, or inverse time feed instead of feed per minute. Thank you