-
Posts
555 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by kkominiarek
-
-
well it's x2 mr2 sp1.....this interface still hasn't been updated.
i wish importing operations was the same as it was in v9.
as kathy stated in 2006, this is time consuming and you don't see your file...only the folder...very strange
-
anyone using a parallel link robot?
-
yes search internet pdf to dxf conversion/translate.
i did this once a few years ago.
try aide cad systems....aide pdf to dwg
also datakit
also autocad has an add-on i believe
i used trial version...it worked pretty well
-
yes i have spoken with greg culp....robotmaster seems to be very strong at programming robots.
i'm still very interested in what is being machined (material removal related) out in the real world.
if we can't hold the tolerance we require with robots then purchasing robotmaster won't be needed.
we will be machining graphite. the parts i envision machining with the robot will have tolerances...+/-.002 to +/-.004
is this achievable?
-
other than to load/unload parts what application do you use your robots for?
i am most interested in multi axis machining.
can you tool change?
can you rough or only finish? (not hp to rough?)
what tolerance can you hold?
what size parts?
rotary or trunnion table?
do you use robotmaster or other software?
thanks in advance for any insight you can give me.
-
can this be accomplished?
-
x2 mr2 sp1
using surfacing.....i would like clearance at start and end of op to be Z3.00"
any retracts during op to be Z.125"
clrance = 3.00
use clrance at start end is greyed out
retract = .125
feed plane = .100
DOES NOT WORK....retracts during op are still at 3.00 not .125
how can i set to work properly?
-
Do you have a "good" solid model?
-
this sounds like it has possibilities....would you be able to show me how it looks when posted out?
-
search.....reverse post process
-
my reseller saw my question...he stepped in and solved.
these fmt lines were the problem, so once blocked out....the date coded as i wanted (01-23-08)
#fmt 14 day$
#fmt 14 month$
#fmt 6 year2
#year2 = year$ + 2000
if i understand correctly.....in X2 anything in the post with $ at the end is taken at face value....so month$ day$ year$ come right
from the computer, we don't need to force these values.
thanks to chris parish at optipro and all others who helped.
-
5 in any or all fmt....did not work
-
jparis thanx for offer.....
i'm getting close.....
these are variables in post
fmt 14 day$
fmt 14 month$
fmt 6 year2
year2 = year$ + 2000
this is in my post
"(CREATED ON - ", month$ ,"-",day$ ,"-",year$ ,")", e$
this is what is coded out
(CREATED ON - 1.-24.-08)
i would like it to look like this
(CREATED ON - 01-24-08)
any ideas how to get rid of points and
force month to two digits???
-
3rd string.....your code did not work.
thanks for trying
-
if i change to this......(add *)
"(CREATED ON - ", *month$ ,"-", *day$ ,"-",year$ ,")", e$
i get this..... = (CREATED ON - 001- -08)
month & day still not post correctly.
-
i've tried 8 forum suggestions and i cannot get the month and day to post correctly.
any help will be greatly appreciated...this is what i have.
original v9 post-
pheader
"(CREATED ON - ",*month,45,*day,45,*year,")", e
this is what was coded in program = (CREATED ON - 05-12-07)
mcx2 mr2 sp1
using updatepost.dll this is what i have-
pheader
"(CREATED ON - ",month$ ,"-",day$ ,"-",year$ ,")", e$
this is what was coded in program = (CREATED ON - --07)
-
11 min 31 sec
Brite Computers D945GTPX (local company)
pentium D 3.4 ghz
2 gb ram
xp pro sp2
-
thanks todd.......it works great.....simple but effective.
-
is there a new toolpath available?....saw cut?
(not the one in router which uses a circular saw blade)
i'm hoping for a toolpath that travels around a part moving up-n-down in Z to use a cutters full flute length.
if a part is 2" thick but you only have 3" flute length cutters....you can program 1" of Z travel as the cutter moves around the part.
-
i'll give that a try....
-
Plot function....v9.1 was.....
screen - next menu - plot
you could set scale, win driver etc...
Does X2 have this function?
I need to create charts for a comparator at
a certain scale.
-
what is "used to work with levels"????
what do you use?
-
errrrr....i was saving all along, my screen looked good but little did I notice I only had 1 entity in the level manager... a couple hrs wasted
-
Is this issue being addressed?
arc 0-90-180-270
in Industrial Forum
Posted
plz look at doc file.
cadcam's ftp site
Text_&_post_files_&_miscv9 X2 arc direction.doc
link
is there a setting i can change to get my arcs as they were in v9?