Debaprakash Nayak
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Debaprakash Nayak
-
Thread Mill, Bottom to Top method Issue
Debaprakash Nayak replied to Debaprakash Nayak's topic in Industrial Forum
As the total insert length is 40mm, hence it is not recommended to engage the full length of the insert at once. As per the tool specification, the TM cutter can produce 65mm depth whereas the insert length is 40mm. If I put 65mm as final depth in the program, then the tool moves to the final depth at the first pass will damage the tool. -
When I try to make a thread mill program using a multi-tooth inserted thread mill cutter (https://www.secotools.com/article/p_02546918?section=products) using bottom to top method with multiple axial depth of cut, the tool moves directly to final depth and then moves to 2nd step. Refer attached video for more details. If there is a solution already, please comment. Mastercam Thread mill Issue.mp4