Sam1
Verified Members-
Posts
67 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Sam1
-
Hello all I am trying to do C axis drilling in mastercam lathe VTL. I select drill point as shown in picture, but when I backplot, it shows as different place, is it normal ? May be because its VTL environment ?, any ideas or suggestions will be great.
-
Hello all I am just wondering if there is any way to define custom right angle head (MST) stp or stl into mastercam mill ?, any tutorials would be great. Thank you
-
Hello all I am just wondering if we can move work offset (G54) up and down in Z axis, lathe VTL ?, or instead I need to move lathe geometry ? I am attaching pic. Thank you
-
Hello all I am having issues with Toggle display on selected operations button as shown in picture, basically not showing toolpath, any suggestions will be appreciated. Thank you
-
Thanks Paul and Ron that solve problem. I am also wondering, how to define custom tool locators for spindle. There are many tutorials or videos for tool locators for turret, but not many for spindle.
-
Hello all l am trying to load tool into tool locator as shown in picture, but when I simulate, I cannot see tool locator, any help or suggestions will be appreciated.
-
Thanks Ron I think I found solution. I had to define 3D tools properly (for ex lower and upper turret, proper spindle orientation, insert up for rough, and insert down for pinch turn) solve problem.
-
Hello all I am trying to do pinch-turn, getting alarm as shown in picture, if someone knows how to fix alarm please. Thank you
-
Hello all I am just wondering if someone knows how to use Advanced options in Multiaxis tilt (as shown in picture), or any tutorials please. Thank you
-
Hello all I am trying to do gradual lead angle change as shown in picture, basically 3deg at beginning and same at the end of toolpath. I am having some issues, any tutorials or suggestions would be great. Thank you
-
Hello all I am new to optirough, My tool is jumping over fixture (actually crash), as shown in picture, is there any way to avoid this problem ? thank you
-
Hello all I am just wondering if there is any way to save section view or different plane views or export them ? Thank you
-
Hello all I am trying to cut Lathe ID groove, but my tool is cutting oversize (wider groove), may be I have error in defining grooving 3D tool, I am attaching Mastercam file, if someone can help please. Thank you Groove-.mcam
-
Hello all I am just wondering, if there is any way to snap on stock model lines ?, or converting them to entities ? Thanks
-
Hello all I was just wondering if wear works with swarf milling, for some reason I cannot see G41,G42 or D value in nc programming output. If someone can help please. I am attaching mastercam and nc file. Swarf Wear.mcam Swarf Wear.nc
-
Mastercam Lathe Canned Rough Cycle (Stock Recognition)
Sam1 replied to Sam1's topic in Industrial Forum
Hello it works, thanks, only problem its leaving uneven material after toolpath, any idea ? Lathe Canned Rough.mcam -
Hello all I am trying to machine ID with top and bottom half, with two toolpaths. Top half is working fine, but bottom half is not recognizing stock, its starting at top of part instead halfway (cutting air), if someone knows how to fix it. Thank you Lathe Canned Rough.mcam
-
Thank you Ron, it works.
-
Hello all I am trying to adjust z height of swarf milling without modifying solid or surface or guide curves, if someone can help please. I am attaching file. Thank you Swarf.mcam
-
Hello all I am trying to create insert drill in Mastercam Lathe, Is there any way to create 3D drill ? I am using 2D method to draw tool from level, not having much success, if someone has better idea. I am attaching two different Mastercam files. In first file (Example 1), I think I am missing insert. In second file (Example 2), I cannot draw tool. Thank you Example 1.mcam Example 2.mcam
-
Hello Ron Thanks for help, I got your file. I am attaching file, if you can please check. T1.mcam
-
Hello all I am trying to program VTL (DOOSAN_VTR 1216M). Turning is fine, I am having issues with milling with C- Axis, at face of part. I am trying to use helix bore. Does anyone has tutorial videos, with similar Mastercam set up, or programming examples ?. I can attach file if need. Thank you
-
Hello all I am trying to put all different windows into one (Toolpath, Level, Planes, Solids), if anybody can help. Thank you
-
Hello gcode, thanks for help. I followed steps as you mentioned, I am getting another alarm as shown in picture. If you have Mastercam can you please correct file ? Thank you
-
Hello all I am trying to use button head tool for lathe Dynamic toolpath, its violating boundary, I don't want to change holder size, but instead I want to change Lathe tool clearance, when I do that I get alarm as shown in picture. Is there any way to fix that problem ?, Mastercam file and pictures attached. Thank you T.mcam
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.