Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi team!
I have 3 Okuma M560-V need to make the right angle head block. But I don't have the spindle face holes dimension.
Would any one please help me to get it. I try to many ways but I can't get it.
Thanks so much.
Hi Jake!
This is the 1st time I run RAH drilling on this YCM vertical machine. The milling in G19 mode is ok, only canned cycle drilling in G19 mode does run right.
I don't known about the parameter changing.
would you please help?
Thank you so much Jake. I found the Parameter in the book, but I can not change it. Do you think that I need to contact the seller to change it.
Thank for your help.
Hi Jake!
This is the 1st time I run RAH drilling on this YCM vertical machine. The milling in G19 mode is ok, only canned cycle drilling in G19 mode does run right.
I don't known about the parameter changing.
would you please help?
Hi
I post RAH drilling program to NC with MPROUTER.pst
My machine is YCM -Fanuc control
G19 G20 G90 G40 G80 G64 G49 G0 M05
G8 P1
G90 M05 Z0
G52 X0. Y0. Z0.
T40 M6
G0 G90 X-5.7348 Y2. C0.
S50 M3
G43 H40 Z0.
G1 Z-1.949 F500.
G19 G98 G83 X-7.8348 R-7.2348 Q.05 F20.
Y-2. X-7.8348
Z-3.901 X-7.8348
Y2. X-7.8348
G80
X-5.7348 F500.
Z0.
G90 G49 Z0. M05
G52 X0. Y0. Z0.
G8 P0
G17
M30
%
on line G19 G98 G83 X-7.8348 R-7.2348 Q.05 F20.
it work doesn't right, the drill move in like rapid and stay in there and move to another location.
when I run on the air 0, It drill on Z axis, not on X axis.
Any one please help for advise
thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.