Span
-
Posts
129 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Span
-
I see the same thing, turn off 'Automatically determine Z depth' and it works correctly.
-
As a quick work around save the profile to a level and link, it will then verify correctly.
-
You have to make sure that the distance from the top of stock to depth is evenly divisible by the pitch. I usually tweak the top of stock a bit to get get clean code.
-
Use Regedit to add new string value PerceivedType as shown
-
"Change at point" not working on linked solid edges
Span replied to NathanEdwards's topic in Woodworking Forum
I can't get it to work either, works fine in 2020 and 2022 pb2. -
Your geometry is not all exactly on the same z. Project - move it to depth 0 and it will be fine
- 1 reply
-
- 2
-
-
-
Want to change the WCS color. Config color has no effect
Span replied to morrissouth's topic in Industrial Forum
Change Plane WCS gnomon and restart Mastercam. -
MANUALLY ENTER X & Y COORDINATES WIREFRAME RECTANGLE MISSING
Span replied to MIKO ELLO's topic in Industrial Forum
Just start typing the box will appear. -
In verify options click use stock setup values under boundaries.
-
Yes, you can send it through my profile address or to 3corgis at gmail.com glad to help.
-
I still have a copy of Versacad. I can only convert to DXF though.
-
I get crashes on transform all the time, translate and rotate. So much so that I've learned to save after each and every change I make.
-
Try this. http://www.emastercam.com/cgi-bin/ultimate...t=032216#000000
-
I didn''t realize you could do that. I'll give it a try. Thanks
-
You can use analyze contour to get the exact overlap required.
-
Put in X3 disk Click Install Check custom Install Check Remove All Gone
-
Put in X3 disk Click Install Check custom Install Check Remove All Gone
-
1 dell 22" wide screen 1680 x 1050 1 dell 19" standard 1280 x 1024
-
it's DeleteEmptyNamedLevels(X3).zip on the FTP site under X3_Add_Ons
-
Oops, doesn't work on our other system so it probably is AI Utilities.
-
No utility needed I think. It works on mine and I don't know of anything I would have added. I didn't know I could do this until I just tried it, very nice
-
I recall this is a bug, you can't use 90°. you can use 89.999 which is probably close enough.
-
Select the geometry you want to change, right click the color box at bottom of screen and select the colour you want. You may have to delete the group first on an import.
-
I think you need to make at least 2 revolutions.
-
You need to change the thread start angle (right below the pitch)
