Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Colin,
Wow! I must say... that is a very helpful reply!
I used "by Entity" and just started breaking the chains, till the wire path looked doable.
I downloaded a file with (3) 4-Axis programs. I will be leaving work at 7:00am CST. I'll check the post tonight, when I get to work and see if anyone has replied on the Sync Methods.
Thanks Again! Great Job!
QTE_SAMPLE_E03998_plate_2_d.mcam
Hello,
Learning....
It seems like breaking the chains along the top and bottom, then re-chain, was the fix.
Though... I did not find any documentation on this.
Hello,
Learning.....
I'm having trouble with this 4-Axis Wire path.
The green color geometry is on top & the magenta color is bottom.
The trouble is the Wire path on top is getting too far ahead of the bottom.
I've attached a picture of what I'm trying to explain.
Using MasterCam 2019
Thanks-
Hello,
Is it possible to transform geometry with plane?
Or in other words... in some cases, I want my plane to move with my geometry. (I don't want to have to go back and move my plane to my geometry)
Thanks.
1.) A Zoom window with in a window in Verify, so you could zoom in on the tool on it's path, this would work great on really big or long parts.
2.) In Define Tool, Why not have Center Drills Defined as common sizes, like... number 2 center drill by default.
Hello,
I have some Lead metal plates to CNC mill, about 1 inch thick and about a 10 inch diameter with a few 3/8 holes.
I looking for some suggestions on tooling, coolant , speeds , feeds
Thank you in advance for your help
I put frontfit.vbs,isofit.vbs,topfit.vbs,rightfit.vbs,viewfit.dll and vstools.ft into my c-hooks in x5
In customize, toolbars, category, I should see ViewFit, I maybe forgetting something...
yes.. it kinda works like that except you gota have the View fit Icons, I search the Fourm for the time I got the information on how to do it,,but with the new fourm I can't go back. The topic was back in july about the 15th, under stevieboy
I just did the install of X5, I forgot the procedure on how, I put the View fit feature in.. on X4, I need them on X5.
Any help would be great! i miss them
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.