Thanks Cole, this was really helpful! I'm still getting my foot in the door to the world of macros. I would like to try it if you're good with posting it. Thanks for your help, it is very much appreciated!

Hey Colin, I am attempting to do the same for the generic vf tr post for our new Haas UMC500. How did you implement TCPC and DWO output? And how did you change the A and B axis output to B and C? Any help is much appreciated!

I appreciate the feedback Craig! I will definitely try that on my next machine build.

Thanks for your response Ron. I exported the STL models in MM, and that seemed to work. Why is that if my main simulation file is in Inches? I'll try another machine to see if that's a fix for it. I tried this just moments ago and it worked! Thanks!

Hey everyone, I just created a machine sim file for our Haas VF4SS w/ a HRT310SP rotary and when I exported each STL as IN units, when I create the machine all components reflect what I exported. I set all the axis limits as the actual machine. When I go to simulate a part, the tool and part are a different scale than the machine. Even the travels for each axis are downscaled. All files are in the same units(Inch) , and my configuration for STL exporting is also set to Inch. Am I doing something wrong? Any and all advice is greatly appreciated. Here is a pic of what I'm seeing at simulation.