35K chipper

Verified Members
  • Content count

    204
  • Joined

  • Last visited

Community Reputation

87 Excellent

About 35K chipper

  • Rank
    Member
  • Birthday 05/02/1948

Uncategorized

  • Location
    Santa Clara (Bay Area)

Profile Information

  • Gender
    Male
  1. check your tool change arm. it might be full of coolant and can hit hard when changing tools. hope that helps. 35K
  2. 35K chipper

    Cat-40 vs HSK-a63 Holders

    HSK A63 good for 20k rpm spindle. HSK F63 good for 35k rpm spindle. hope this helps 35k
  3. 35K chipper

    High performance aluminum stub drills

    M A Ford 3 flt .125 cbd drl at 700 SFM or 21390 rpm at 171.12 ipm . drilling .38 deep one shot , no spot , no peck. hope that helps. . .35k
  4. 35K chipper

    High performance aluminum stub drills

    M A Ford 3 flt .125 cbd drl at 700 SFM or 21390 rpm at 171.12 ipm . drilling .38 deep one shot , no spot , no peck. hope that helps. . .35k
  5. Mark, These people make Femtosecond lasers for hole drilling. There is an article about drilling holes in injector nozzles in the current issue of Laser Focus World. Here is a link to the company that sells the equipment. http://www.raydiance.com hope this helps. . . 35k
  6. Gcode, Big Kaiser has hsk 125a. the spindle inter face has 11000 foot lbs of holding force!!!!!!!!!! big and strong. you will like them when you see them in action. . . 35k
  7. 35K chipper

    Trunnion Tables

    Glad your back James!!!!!!!!! . . 35k
  8. 35K chipper

    Okuma MU-10000H

    Gcode, I have the DNC-DT, Supernerbs, glass scales. and the micron option (0.0001mm 0.00001in). after 10 years it still holds all its precision like it was new!!!!!!!! OKUMA is always my first pick. . . 35k
  9. 35K chipper

    Miniature Engraving

    Jamman, Here are the Harvey tools i use 75102 & 75102-c3. they are runner 2 flt cutters i run at 35000 rpms @ 43.75 ipm @ 0.003>0.004 doc in aluminum. . . 35k
  10. 35K chipper

    Please post the calculation for metric threads

    sorry i stand corrected 1/.031496 = 31.75006 TPI (micron scales and control here) . . 35k
  11. 35K chipper

    Please post the calculation for metric threads

    .8mm /25.4 = .03149606 ipr = 31.49606 tpi small fix . . 35k
  12. 35K chipper

    A VFd question

    CAUTION do not try to turn a spindle motor rated at 12000 rpm at 24000 rpm!!!!!!!!!!!!!! you will damage the bearings, the motor will over heat, the balance of the spindle will not handle 24000 rpm and it could explode. THE MOTOR AND VFD MUST MATCH !!!!!!!!!!!!!! . . 35k
  13. 35K chipper

    y axis over travel

    Millertime, check your Y axis limit switch it might have coolant in it or a loose wire. I had this same condition about 3 weeks ago. had to replace the X axis micro switch under the table. Just a thought. . . 35k
  14. 35K chipper

    Block Numbers

    Just like Newbeeee. . . 35k

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us