hi everybody, i've a problem with my mill, doosan vmc with heidenhain 530. when i design the part on the top plane X+Y+ the post work like mirrored, because the nc file is generated with reverse X ex: a contour line goes from X0 to X100 in Mcam, but the machine do it from X0 to X-100 what's the definition to change in the post file? i'm not so experienced with heidehain thank you

nope, i'm using wear comp

i there. today i'm trying to generate a contour of an hole but when i send it to the mill, the program generate an error about the G41 this is the code: G0 G17 G40 G49 G80 G90 T15 M6 ( TORO 16 ) G0 G90 G54 X102.5 Y138.5 S2800 M3 G43 H15 Z100. M8 Z1. G1 Z-10. F800. G41 D15 Y137.5 G3 X107. Y142. I0. J4.5 X102.5 Y146.5 I-4.5 J0. X98. Y142. I0. J-4.5 X102.5 Y137.5 I4.5 J0. G1 G40 Y138.5 G0 Z30. X161. Y237. Z1. G1 Z-10. G41 D15 X162. G3 X157.5 Y241.5 I-4.5 J0. X153. Y237. I0. J-4.5 X157.5 Y232.5 I4.5 J0. X162. Y237. I0. J4.5 G1 G40 X161. G0 Z30. The holes are d.20 and d.25 and the tool is d.16 , i read somewhere that a too big tool cause problems the error code appear after the z-10 movement