Jayson Kramer
-
Posts
4,479 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Jayson Kramer
-
You are trying to log into the videos here or on Mastercam University ?
-
Pete need more info like what post and cnc machine is this for. looks like 3+2 of course.
-
As asked by Jeff please make a sample that shows the issue and send to QC at Mastercam. Thank you
-
Look here in the 2020 Launcher.
-
Have used this button option. as you can see had all of the operation open and the arrow was not seen. select this option to bring into view quickly.
-
Like Ron stated, contact you Mastercam dealer and request the post install of all the factory posts. On the Tech exchange you can go and grab individual posts. the one that comes from dealer has a large list of factory posts. -
That know Gnomon represents the world planes . Like others stated if use your own WCS this Gnomon will always show the original World planes. you notice that your C and T and the Custom WCS Gnomons follow your custom planes correctly.
-
why does raster rise and fall next to walls?
Jayson Kramer replied to lowcountrycamo's topic in Industrial Forum
Are you using a containment boundary are you selecting the all the floor and walls? -
Tom did you figure this out?
-
Please make sure you use the Email genuine.mastercam At Mastercam and also send an email or call your reseller that you got this. CNC maybe a little slow today as it is later in the day at the start of the holiday weekend.
-
You must be talking about a certain path. As all that mentioned path wise does support these tools especially lolipop.
-
Cutter Comp Beginning on Arc Move - How to Avoid?
Jayson Kramer replied to Bill H's topic in Industrial Forum
This B-NCI this output a different way . you would not see this as a standard NCI posting like this. -
As for the editor, it is popping up CIMCO because it was changed in the Config area to default to it. it you went back in using the quick short cut key of "Alt F8" go to Start and /Exit. You will seee Editor and set it to Mastercam and this will use the Code Expert folks were talking about as that is the Default editor from install.
-
Do c axis lathe tool paths consume a mill licence?
Jayson Kramer replied to Leon82's topic in Industrial Forum
If you do not set up what will call a custom launch icon by default if you Mill and Lathe on the NetHasp it wants to pull them together. Use the "Mastercam Launcher" to configure just to pull a lathe only. As you now know all ready the answer that you do not need a mill license for C-Axis paths. -
Do you use Slice over Spin in Turn profile and why?
Jayson Kramer replied to Jayson Kramer's topic in Industrial Forum
So if there are holes or slots on the Profile when doing Slice you will see the divets or holes shown in the profile cut is this what you want? Now you say you use so you can get and upper profile. but as shown in the picture this is an option. So there is know other reason for using slice over Spin for you? Thanks
-
Do you use Slice over Spin in Turn profile and why?
Jayson Kramer posted a topic in Industrial Forum
Question for Mastercam users, when doing lathe and have a file with holes for example.Do you ever select the option of Slice instead of Spin? If so why? please give example of why you would use that over Spin please. -
Mark let me know if this helps.
-
Ok well I cannot send you a msg explaining. I am asking for the company named in the lower right corner when the editor is sold under so I can check the licenseing to make sure you did not get the wrong license. Did you know I spent the last few years as tech support for Cimco?
-
can you give me the name of the company it is under? I want to check something?
-
Calc is an add-on you are correct. Ron has a special license.
-
Look in the lower corner of the software window to see if has your company name or licensed to Mastercam user world wide.
-
So you like the option to change say color for the X values and so on correct? So like this shown below.
-
ATM not sure who that is but great to hear. Northwoods tool list yes a lot of the post developers actually used to add that into the posts as a easy option to turn on and output. it may have been In-house that started that in the older posts. When I used to work for the local dealer out here I was the Northwoods guy. I would talk a lot with Bill back then.
-
So you purchased the upgrade to Pro. Northwoods wow a flash from the past. LOL
-
So what did you want to see different to colors? and the rest is all based of Backplot so I will group those together. Thanks for the input.
