Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

The Dude

Verified Members
  • Posts

    53
  • Joined

  • Last visited

    Never

The Dude's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Right click on the ops>toolpaths>transform
  2. I've run into this about 4 or 5 times now in different files. Every time, I was coming out of adjusting the lead in/out parameters. I then did a regen to that op and then backplot. I'll do the email thing mentioned above. Should we be sending the post that we used at the time?
  3. Just tried it in verify and nothing happened. Guess this ones kinda like the rare and elusive "hasp not found" popup.
  4. It happened to me after create circle>center point. I clicked the check mark, the above stated error popped up, and I couldn't do anything but the three finger salute. It happened another time too, but I was so busy, I didn't think to make a mental note of "how I got it to happen".
  5. The little question mark that used to be in the corner of every dialog box of V9 was handy. You know, the one that allowed us to click on fields to get quick descriptions.. Is that going to eventually come back? Going into the full blown help can be a bit of info overload.
  6. Na. I'm spending too many hours trying to figure out X. It's driving me crazy!
  7. I was thinking about spending some time with myself. Care to join me?
  8. Hey dude! Whatch ya doin later?
  9. I'm having the same issues. If you click "edit tool" on any tool, the length and dia are set to "0". If you change it to the tool number it doesn't remember it next time, and if you click save tool, it duplicates the tool in the tool library instead of overwriting it. When you go to select that tool again there's not enough desc. to determine which is which!@
  10. Cool thanks!!! If only I could figure out why my tool offsets randomly come out as H0.....
  11. gO INTO ALL YOUR PARAMETERS>MISC VALUES> AND SELECT "Automatically set to post values when posting". Next time you start an op, it will default to that setting and post your g54's.
  12. Under settings>customize>drop down>right click>> you can add origin,endpoint, etc (from auto cursor). Then when a function like line is active you can just right click for what you need.
  13. What could I have done to make the "g54" dissapear in the post? (g0 g90 g54 x y) The first few programs I made look like the above ex. now they look like (go g90 x y). I found a few things in the control deff that referr to it, but I know I haven't messed with any of that. oh boy....
  14. I'll second that. I have to show it the tool file everytime I open the part.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...