Hi all, Thank you so much for your many replies!!!! I´ll try all that. I also want to say that the MPMaster works like a charm, the problem comes when using MPFan Post. I´m in metric. It´s solved for me thank you all again!!!

Hi all, I´ve got a problem here. In the programm below everything is shown fine in Cimco backplot also in the machine simulation. When I start the cycle the machine cuts through the part. This shouldn´t happen. Is there a parameter to change in the control? Thanks in advance for your help! G00 X-161.566 Y-34.463 Z0 N8770 G1 X-50.7 N8780 G3 X-49.384 Y-33.147 I0. J1.316 N8790 X-50.218 Y-31.922 I-1.316 J0. N8800 G2 X-66.651 Y-15.399 I10.682 J27.057 N8810 X-68.374 Y-8.611 I42.016 J14.282 N8820 X-68.608 Y-5.008 I27.602 J3.603 N8830 X-68.609 Y-4.963 I27.836 J0.----------does a full Circle N8840 X-68.523 Y-2.657 I32.043 J-.035 N8850 G3 X-68.42 Y.005 I-34.355 J2.662 N8860 X-68.522 Y2.662 I-34.458 J0. N8870 G1 X-68.608 Y5.099 G0 Z20

bump

hi all, after updating the my post from X4MU3 to X5 I recive this massage: RUN TIME - Access attempted on buffer that is not defined. Buffer number: 4 I´m sure i did the update in the right way, any ideas?

Me too please.

Somethinng new about that?

Hi all, Does anybody of the fanuc gurus knows if it´s possible to have alle 5axis work simultaneously in a programm. It works well with G00 but not in blocks with G01- otputs an error.

I also tried on my XP 64bit. Doesn´t work at all!

hi, Thanks Mr. Bell sir, works perfect! Problem solved.

Hi all, No chance to get it installed on XP 64bit. Is there any other installation file available (iso or something....). Maybe anybody else has an idea how to get this work on a 64bit XP. This ist the first time we have trouble with installshield files. Plz help I want to get this to work on my PRECISION. Thanks in advance.

Hi, It doesn´t even come to the "setup dialogue". klickin´ on "mastercamx4-web.exe" 1.extracting mastercam X4.msi 2.decompressing mastercam x4.msi 3.extracing ISS Setup.dll 4.decompressing ISS Setup.dll then the error message comes. I tried it also on a fresh 64bit installation, no firewall, no antivirus, all updates.

I tried both - no way to get installed. I have Outpost Security Pro installed on that Notebook (M6400). Any other ideas?

hi all, Me to, downloaded it three times. Works fine on any 32 bit. Not on XP 64 bit. Got the same error number.

next up pncoutput #Movement output pcom_moveb comment$ if coolant$ <> 0 & coolant$ <> sav_coolant, [ pbld, n$, sm09, e$ sav_coolant = coolant$ ] if coolant$ = 1, sm09 = sm09_0 if coolant$ = 2, sm09 = sm09_1 if coolant$ = 3, sm09 = sm09_2 if cool_zmove = yes$ & (nextop$=1003 | (nextop$=1011 & t$<>abs(nexttool))), coolant$ = zero pcan if cuttype = zero, ppos_cax_lin #Toolplane rotary positioning if gcode$ = zero, prapidout if gcode$ = one, plinout if gcode$ > one & gcode$ < four, pcirout if mr_rt_actv, #Restore absolute/incremental for G51/G68 [ absinc$ = sav_absinc mr_rt_actv = zero ] pcom_movea