You sir solved the puzzle ....... THANK YOU !!!!!

Neurosis, Thank you will give it a try ... We are on 2021 , need to update my signature...

Gurus, Good morning, I come in this AM after leaving puter on and file open to log into windows. There was a windows update. When I open Mcam 2021 it crashes immediately, little report window pops up, I ran the web install and repair - it will then go for a bit on starting up saying preparing for 1st time use, the when when goes to enable installed items it crashes. Lathe seat in the shop still opens, but mill seat does not. I tried to uninstall windows update but one of the 2 will not completely uninstall ... Any help is greatly appreciated. Mcam 2021 patch 1. My mait did expire 9/2020 and working to get it back on subscription ... Just an FYI

Used the 4X post for ST machines ..... looks way better, in the tool parameters should I be using from machine, user defined or from tool and should I have a value in them ... Thanks again .....

Just installed 2021 on a fresh puter, downloaded the TL2 ax lathe post from the website. Everything went well except tried a simple face program ... it wants to start in center and go out. I cant seem to fix this and I changed to much I think. I AM NOT A LATHE GURU , just teaching ourselves as we go ... Any help on getting the post to be be able to post and go would be appreciated. New Lathe ST20 bolt on turret ... Thanks in advance appreciate it. think went I went with wrong post off tech exchange hmmmm

Will try that ..... Thanks again.

Not what I was hoping to hear ... I could set up another computer but my libraries and files and everything is on this one, I gotta keep my mill running and get some lathe work moving too. Hmmmm Thanks.

Have my mill hasp in, my lathe is a seperate hasp. How can I fire these up at same time on same computer. I dont have the lathe hasp in computer. Windows 10, Mastercam 2020. Thanks in advance

sounds like a plan, I have dxf downloaded ....... thanks again.

Ron, Does it help there is a 3D model of the tool?

Thanks Ron, will give this a go .......

So playing with Lathe and on my way to something good I think :head scratch: , I have some tool library questions ... Way different than milling I see. I have some internal profiles almost bowl or cone shaped and got some new tooling ..... BUT no idea whats next - I am not sure where to start the process of designing these bars, how to put them in the library as they must not be standard library Iscar tooling. Bar #s A20R SVJCR - 11 A16R SVJCR - 11 INSERT # VCGT-221-AS IC20 I probably should have just searched this topic but we will see ...... Thanks in advance ...

Sweet .... Thanks guys ... Still best info on the planet

Ron, A switch in default in mplfan ...... is it old_new_sw (6t to 0) default was 1 Thanks Millman

Good day all ....... Pulled the trigger, opened my own tool shop taking over a lease on some older equipment. I just purchased a used FADAL which I am solid with using, post config and such, but now also have an older Mori SL3 with a Fanuc T6 controller that the X is backwards from the rest of world. I am NOT a lathe guy so I will be asking many questions as I have work for this machine and is fairly complex (to me) profile so I will be seeking some help, tips and tricks ....... My seat of 30 day eval while the banking process goes kicks off today and very excited ..... Mill 3 + Lathe Anyone have experience programming Mcam with this Lathe, I would say its mid 80s just a guess but a tank and good lathe to start out with I spose ......