TOOL/SPINDLE-SPEED-MAX works in lathe active reports

Has this ever been addressed?

I'm sorry, I overlooked the new forum addition. I am going there now.

Eh, I'm giving up on this release. I can't paste a number into the translate dialog box. I actually have to get a program to a machine, so I can't trust using this. It looks cool, but it seems like it is so buggy that it can't be trusted. Plus I wonder why they went to the trouble to redo all the toolbar icons, but the ribbon bar is still the original style as well as the translate/rotate dialog boxes.

I am having the same problem. I didn't have much time to try it since I installed release 2, but I was going to try out release 3. It's almost unusable with the jumpiness/lag I have to wait for menu items to show up and model rotation with 3dconnexion controller is terrible. I wonder if there is a quick fix?

This may not be anything at all what you are talking about, but are you specifying top plane for stock model?

I modeled this assembly in mastercam.

I got the same error on Thursday. I essentially have a clean mcx7+ sp1 install. Said there was an error in depth cuts. I had no depth cuts. .005 deep, .03 inc feed plane, .05 abs retract plane, 2 inch clearance plane only at beginning and end. I had to just post it and use it. There seemed to be nothing wrong with it.

Yes, we were told to use the c view utility. We have a Mori NL2500Y and this seems to work for us.

I used to have this problem with x6. It went away when I started fresh and didn't import any config files at all. Must be something about upgrading.

Well, I sent one off. I don't know if it will be sufficient. All file types were greyed out except for "config" I referenced a link to this post in the comment and the email body.

Yes I will.

I'm not going to try to be grammar police on a forum. I would be very busy. I just think in a software error message, the spelling/grammar should be correct. One of our Mori lathes from 1999 tells you to "Please closed the door" on startup. That's from Japan though(translating error).

I think they should have used the word "then" instead of "than" in the error message.

Can you just do a "manual entry" under toolpaths? It allows you to output manual code or comments. Not sure exactly what you are trying to do.