I only got to see my program run, when it is BAD NEWs.When the prog. is NFG that the programmer go to the floor to fix it.

THANKX Jimmy. You got it right on the money. IT is. G0G90G53 X0.Y9.0 Stupid me. jimic

CNC MILL FADAL VMC4020 GE FANUC series 18i-MB5 I still could not understand why that the G28 x0. Y9.0 suppost to move the machine table to the home center and closer to the operator. Machine table x0,y0 is in the center of the table. But the Y axis move to Y9.0 then back to Y0 and stop there ?? That how my NC prog. -- M9 M0M5 G91G28Z0. G28X0Y9.0 M30 %

quote: -------------------------------------------------------------------------------- What is that sucking sound?????????? -------------------------------------------------------------------------------- We heard it here in Canada ....

Steve, I can't open Mastercam and when I look into folder some dir were gone. So the IT guys said, I f***** up and he kind of "repair" it but all my setting were gone. Sad. What a howling night... Now I am up and running but all those tooling and OP. were gone ..after all that bloody years ...no tear to cry .. I hope someone learn it from my mistake.

I have to re-install my MR2 this morning because the MR2 CRASHED after the Halloween night? System: Mcax MR2 level 2, mill Now I have to reset all my setting. My question is how do you all back up your setting so that such thing happened you could just move things around and have what you used to be. What file or folders to backup? and where? HAPPY the day after ....

THANKS Guys >>> All set, back to business.

My D0/UNDO icon is missing ? Somehow I have removed it my mistake. Now I cannot find it. Is there anyway that I can save my setting so that even I made a mistake. When I re-open my Mcax again all the setting will be the same.

HOW ? Please share.

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ POST AND GO. Period. (if the post is clean !!) $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

John,I done as you suggested.That cause by ptlchg$ pcomment2 What this 1006, 1007, 1008 if gcode$= 1006 pbld,n$, pspc, "(", scomm$, ")" #Comments pcomment2 #Comment from manual entry spaces$ = 0 scomm$ = ucase (scomm$) #1005 - Comment option 1 #1006 - Comment option 2 #1007 - Define comment with output line #1008 - Define NC parameter comment #1026 - ? if gcode$ = 1005, pbld, n$, pspc, "(", scomm$, ")" if gcode$ = 1006, pbld, n$, pspc, "(", scomm$, ")" #Comments #if gcode = 1006, pbld, n, pspc, scomm #Codes if gcode$ = 1007, "(", scomm$, ")" if gcode$ >= 1008, pbld, n$, pspc, "(", scomm$, ")" if gcode$ = 1026, pbld, scomm$ if gcode$ <> 1007 & gcode$ <> 1026, e$ spaces$ = sav_spc % pheader$ pheader$ O5566 (HOLE) pheader$ pheader$ (PROGRAM - HOLE.NC) pheader$ pheader$ (DATE - OCT-18-06) pheader$ pheader$ (TIME - 16:34) pheader$ pheader$ (T1 | 1/2 SPOTDRILL | H1 | D1 | D0.5000" | DRILL/CBORE) pwrtt$ pwrtt$ (T2 | NO. 32 DRILL | H2 | D2 | D0.1160" | PECK DRILL.) pwrtt$ pwrtt$ (T3 | 1/8 REAMER | H3 | D3 | D0.1250" | DRILL/CBORE) pwrtt$ pwrtt$ (OVERALL MAX | Z.1) psof$ p__31:1165 (OVERALL MIN | Z-1.5) psof$ p__31:1165 G90G80G40G17G0 psof$ psof$ (FADAL) psof$ pcomment2 (TESTING AUTODRILL) psof$ pcomment2 (** SPOT FOR .125 REAM,**) psof$ pcomment2 N1M6T1( 1/2 SPOTDRILL) psof$ ptoolcomm (MAX | Z.1) psof$ p__34:1202 (MIN | Z-.07) psof$ p__34:1202 M3S1000 psof$ p__33:1199 G0G90X2.824Y-3.6706G54 psof$ p__33:1199 G43H1Z.1M8T2 psof$ p__33:1199 G81G99X2.824Y-3.6706Z-.07R.1F4. pdrill$ pdrill$ X4.907Y-3.87 pdrill_2$ pdrill_2$ G80M9 pcanceldc$ pcanceldc$ G0M5 ptlchg1002$ pretract G91G28Z0. ptlchg1002$ pretract M1 ptlchg$ ptlchg$ (FADAL) ptlchg$ pcomment2 (TESTING AUTODRILL) ptlchg$ pcomment2 (** DRILL FOR .250 REAM **) ptlchg$ pcomment2 N2M6T2( NO. 32 DRILL) ptlchg$ ptoolcomm (MAX | Z.1) ptlchg$ p__34:1202 (MIN | Z-1.5) ptlchg$ p__34:1202 M3S3000 ptlchg$ p__33:1199 G0G90X2.824Y-3.6706G54 ptlchg$ p__33:1199 G43H2Z.1M8T3 ptlchg$ p__33:1199 G83G99X2.824Y-3.6706Z-1.5R.1Q.15F12. ppeck$ ppeck$ X4.907Y-3.87 ppeck_2$ pdrill_2$ G80M9 pcanceldc$ pcanceldc$ G0M5 ptlchg1002$ pretract G91G28Z0. ptlchg1002$ pretract M1 ptlchg$ ptlchg$ (FADAL) ptlchg$ pcomment2 (TESTING AUTODRILL) ptlchg$ pcomment2 (** REAM FOR .125 HOLE **) ptlchg$ pcomment2 N3M6T3( 1/8 REAMER) ptlchg$ ptoolcomm

For Alum. I usaully use 3/4" dia spot drill with 90 deg Incl. Run at S3000 F12 with G82.

#if stpgrpname <> snull, pbld, n$, pspc, "(TOOLPATH GROUP - ", stpgrpname, ")", e$ Still can not find those lines in my Post ??

John is a good Postman

//Keep an eye out for ops not importing like they should. I reported it a few months back. It's not consistant. Some G83 cycles import as G81. Tapping cycles get switched around too.// Thad, I noticed that on the Define Tool Page, At parameter section. Cycle : drill/cbore. tap etc On the m6 tap hole it was set for drill/c/bore not Tap. Could that caused the problems ? jimic