If I remember right the 5X posts that are provided with Mastercam won't post subs. You'd have to buy a special post.

Edit another/similar drill.

This happens in ALL versions up to 2021. Semi retired since. Struggled with this the whole time I used MC. Most of the time it works.

This happens in all versions. One day it happens, next time it doesn't. Sometimes changing planes around works.

In 2021, after you select the solid for a boolean, the common is in the option page .

Black from the start, tried other gradient colors. Went back to black on black.

I have seen this also, not as profound as your example. It looks like an overlap issue. A solution would be welcome.

Surface Finish Parallel going the length ways.

That doesn't look like a proper Morph application. More like parallel to chain, Are you trying to angle to the side walls?

My guess also.

Happens to me allot, it never did it with the old hasp installed on my PC. Now that we are a network hasp it happens frequently.

We recently updated to a nethasp or whatever they call it. I still had older versions of MC installed on my computer. Come to find out I was using the older versions for outputting NC code, Cimco edit is my preference. I was getting simullar alarms. The new Hasp would only work with newer versions of mc so my 2020 was linked to 2017 on my computer and the nethasp wouldn't work with the old. Had to uninstall all older versions and rename or delete the folders and reinstall or do a repair to 2020. Worked after that.

Its in your start menu/Mastercam Advance Configuration

I will use this, thanks.

If I remember right we had to modify the post. Ask your reseller.