Thank you for the feed back much appreciated.

Can the tool path icon finish leftover be put into the ribbon bar in Mastercam 2017? I've tried with no success.

Centre of stock is offset from lathe centre. Stock is 2.5 X 2.5 X 2.5, note stock is held in a fixture. Verify displays stock as round stock and on centre of lathe axis not offset from centre. Stock setup is set to square block and stock model is set to square block. Please help is there something I'm missing? Using X9 hle. The stock model is displayed proper Thanks in advance JB

How do you import new tools into Mastercam's tool library???? and how do you create a new tab example thread mills Thanks jberger

I have been reading some of the forums and come across people mentioning downloads from the FTP site. How do you get to the FTP site for downloads and how do you get a password for it Thanks in advance jberger

it is a dv7-2078ca hp pavillion 8 gig ram 64 bit intel core 2 quad cpu Q9000 @2.00Hz 2.00 GHz video card ATI Mobility Radeon HD 4650

OFF

Email meWhen I dimension in X4 in Windows 7 I get pointer trails on the screen I have to clear colours to get rid of the trails. Is there a setting to illiminate the pointer trails

When I dimension in X4 in Windows 7 I get pointer trails on the screen I have to clear colours to get rid of the trails. Is there a setting to illiminate the pointer trails

Thank you very much for your reply, I appreciate it

The X4 post we have posts out two digits after the decimal, we need four digits after decimal. Can anyone tell me what line item I need to change in our post? My hasp number is ##### Joerg [ 05-08-2010, 12:02 PM: Message edited by: gcode ]