Take a look in the MPMaster that In-House has on their site here. I just compared their PWCS set with our Generic Haas post and was able to change things up a bit to use G54-G59 and then G154 P1-P99. I am sure with your example, if you can understand the IF THEN statements, you should easily be able to change it. Mike in MN

Actually using MC X4 MU1 today to program, the dark Verify is very bad for trying to see anything it's doing. While changing things per this thread on both computers (one ATI and one Nvidia Quadro) both seem to have the same problem once I get past the black out, dark verify. Shading has no effect. Mike in MN

Changed all the settings per this thread, worked out for our ATI card and Nvidia. Still had to change the Shading Options because it was still dark. (Turned on 2 additional lights at opposite 45 degrees and worked good) Mike in MN

quote: (have that darn ATX card the company won't replace) Ooops, meant ATI. Mike in MN

I had the same initial issue after install today, (have that darn ATX card the company won't replace) had to disable the "Front Buffer" in the "Screen" setting before it would appear finally, but very dark. Mike in MN

I have this problem intermittently also. I don't use transform and it is X4 native program. Mostly mine are when I change anything in a operation parameter, like a "Z" height or Leave stock XY, it would dirty that one which is a given, but also dirty a whole "Tool Group" which is completely separate from the operation in a tool group that is being edited. The geometry, wcs and tools would not even be the same, but for some reason would keep dirty that one tool group. Not a big deal being that mostly 2d contour passes, but still wonder why. Mike in MN

Just waiting on the "Powers that Be" to figure out what they got going. Just another hurry up and wait deal. Gets frustrating that they want all the information in the world right now. I make phone calls, send emails get things moving, then it's on hold till they make a decision. I told my boss yesterday that he drags his feet, I then stopped and said rather than drag your feet, ever see a dog drag their a** on the carpet? That's what you do. He wasn't impressed, but all of us on the floor loved it....lol Thanks for the info everyone...Hope to give it a shot. Our reseller does offer Mold Plus, so we will probably be trying that route if someone makes a decision here. Mike in MN

Thanks, we are supposed to be getting some prints to quote tomorrow and if the job goes through, I guess we will be looking into it. We all know how far RFQs go now a days though. Mike in MN

Anyone using a translator for Catia V5 in MC. I have talked to reseller in the past and they say a Moldplus Translator. Does anyone know anything about Catia in MC? How does it work? Thanks, Mike in MN

Noted! I didn't try singling anyone out nor did I mention anyone specific, just wanted to maybe encourage those that are frustrated like myself that to try the QC avenue. I just didn't want to be someone that complains without trying to get feedback to someone that could hopefully resolve issues (if they are just) for future releases. I guess that is what I was referred to on here. Personally having some bad days at work and trying to find some directions for help, that's all. Sorry, Mike in MN

I guess it's just my frustration with this new release, but at least now reading these threads I feel that some of it isn't my fault nor the hardware we are using. There does seem to be some bugs. Mike in MN (11. Issues with your reseller should be resolved directly with your reseller and/or CNC Software. Airing out your issues using the forum will not be tolerated.) [ 09-23-2009, 06:09 PM: Message edited by: Jay Kramer @ Precision Programming ]

WOW! Support is much better in a public forum. Mike in MN

Roger, Well like I stated I sent a list to CNC Software. I just figured since you stated there are no problems with X4 with regards to crashes, when this forum states the opposite there was little reason to talk about anything else. Just trying to find out if its me, hardware, software, or what the issue is. Also, our other seat has an Nvidia Quadro and has the same problems. Hopefully with the MU1 things will work out better and I can convince management to keep going when maintenance comes around again. Mike in MN

Just bug related things. Made comments here along with talking to Reseller. Hopefully, the issues I am having will be resolved during the MU1, for all of us. Mike in MN Sorry Mike rule 11. (11. Issues with your reseller should be resolved directly with your reseller and/or CNC Software. Airing out your issues using the forum will not be tolerated.) [ 09-23-2009, 06:06 PM: Message edited by: Jay Kramer @ Precision Programming ]

I made my first email and sent it to qc today. Hopefully, trying to find the right directions for help will get some stuff resolved here. (here at work, not in the forum... ..) Mike in MN (11. Issues with your reseller should be resolved directly with your reseller and/or CNC Software. Airing out your issues using the forum will not be tolerated.) [ 09-23-2009, 06:05 PM: Message edited by: Jay Kramer @ Precision Programming ]