SONAVO
-
Posts
93 -
Joined
-
Last visited
SONAVO's Achievements
Newbie (1/14)
0
Reputation
-
Thanks a lot JParis. I do appreciate it. Best Regards Son Vo
-
Thank you very much. I got it. Thanks a lot. Best Regards Son Vo
-
Thanks for your help, yes I planning holding the part on 5 axis machine but the head rotation ( B AXIS) is not full rotary. Thanks. Best Regards Son Vo
-
Hello MasterCam User! I'm asking for your help, I want to do 4 axis engraving on the 20deg. bevel of 5 inch O.D. Any help would be greatly appreciated . Best Regards Son Vo.
-
Thanks a lot for your help. I do appreciate it.
-
please attached if you could create a boundry for the pockets. Thanks 209462-1_REV_A.MCX-6
-
My license doen't have solid all i have is surfaces. Is that a problem.
-
I don't know why it only create the outside boundry. Best Regards SVo
-
Dear MC User, How to create 2D boundary at the current Z depth in the current Cplane for the pocket. Thanks for your help. Best Regards SVo
-
I would like to say thanks a lot for your input. I do appreciate it. Best Regards. SVo
-
Dear MasterCam User, I want to do a dynamic area mill on P550 material and can't seem to find any samples in the dynamic mill Database.Plan on using a 5/8 5 flute high performance end mill.Any recomendations on step over and speed and feed?
-
Thank you very much. I do appreciate it. Best Regards SVo
-
Dear MC User! I have tried to drill 8 hole rotate about the X axis, but some how it drill only 5 holes event I have selected 8 holes. Any help would greatly appreciate it. Best regards Son Vo
-
Thanks for your help. I will try. Thanks Best Regards Son Vo
-
That's Fadal. Thanks
