Since I started using 2017, I have had an issue where if I have only one operation, there is no tool change number generated. If I have two or more operations, both operations have a tool change number. The other guys here do not have this issue and we are using the same post processor. What am I missing?

We are having a similar Parasolid Data error in mcamX7 mu2 when we attempt to open SW2014 files. I tried to use the fix provided by Glenn at the top of this thread but all I get is an error code 0x8007005 which appears to be related to permissions. I double checked that I had administrative priviledges but still no success. We get *.sldprt files from a lot of different users so the temporary work around of using *.x_t files is not so convenient.

All, I have an ACER kneemill, 2-axis CNC retrofit with the Mitutoyo/millstar CNC control. The computer has completely broken down and cannot be repaired. The glass slides, servo-motors, servo-amps etc. are in good shape. does anyone know of a replacement CNC controller that will plug and play on this mill? Dave Savage Technical Services Washington State University (509) 335-1196

That's a good way of doing it. I found I could do it too with Transform rotate toolpath.

Hi Colin, Thanks for your help. I did email QC this morning, and got the following reply: "This appears to be an issue logged as cnc00038652 but is now fixed in the Maintenance update of X3. There appears to be no work around for the time being." So I guess I'll wait for the maintenance update. Bummer. Thanks again. Cheers, Steve

Ok. The 2nd one is there now. It is called 4thaxistestX2. Still in the X3 Files folder.

Hi Colin, The file is on the FTP site. In the X3_Files folder, it is called 4thaxistest. I will post the X2MR2 Z2G (the correct one) as well. Cheers, Steve

No thoughts or words of encouragement from anyone?

OK. Starting to get a little frustrated. Here's where I'm at: I tried changing every conceivable option in Mastercam to see if it would change. It didn't. I found that the letter R that is out put with the rotary move is some sort of retract or clearance value. Technically, R is from the refht_a in the post. It's like after the first canned cycle line, it completely ignores what to do next. It starts it's own canned cycle with the tool feeding to -.585 in Z and retracting to infinity. This file was not imported from X2. I simply made the same part in both programs. In X2 it works, but not in X3. Any ideas? Thanks, Steve

I did the post debugger. There was nothing there about the rotary. Where the canned cycle starts, the post gets the pdrill string, and then the only other thing before the G80 is a pdrill_2. I'm at home now and tried with the generic Haas post (my email wouldn't let me download my post...) and I was still getting bad code, nearly identical to the first bad code, which tells me that it wasn't the post. I've uploaded my file to the FTP site. In the X3_Files folder, the zip to go is called "4thaxistest". Thanks

Ha. Cheers. The 2nd one is right. The first one is bad. I've determined that it's something between X2 and X3 as both programs use the same post. Any thoughts?

Weird. This is what I get in X2 MR2. code: % O8001(BETA COLLAR 1) (DATE - 09-16-08-15:44) (MASTERCAM - HAAS VMC) (START TOOL LIST) (T1 3/8 SPOTDRILL , DIA. - .375 ) (END TOOL LIST) G0 G17 G20 G40 G49 G80 G90 ( 3/8 SPOTDRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .375 ) T1 M6 G0 G90 G54 X.5 Y0. S7500 M3 M8 M31 G43 H1 Z4. G98 G81 X.5 Y0. Z1.17 R1.35 F4. X.9 X1.3 X1.7 A120. X1.3 X.9 X.5 A240. X.9 X1.3 X1.7 G80 M5 M9 G91 G0 G28 Z0. G28 A0. G28 Y0. A0. M30 % This is exactly what I want. What is the difference?

The header of the post says it's a "mpfan". I read the post about updating the parameters, but I couldn't find those parameters in the post.

Hey Gang... Having some problems with the 4th Axis output on our Haas. code: % O8001(BETA COLLAR) (DATE - 09-16-08-15:13) (MASTERCAM - HAAS VMC) (START TOOL LIST) (T1 3/8 SPOTDRILL , DIA. - .375 ) (END TOOL LIST) G0 G17 G20 G40 G49 G80 G90 ( 3/8 SPOTDRILL TOOL - 1 DIA. OFF. - 1 LEN. - 1 DIA. - .375 ) T1 M6 G0 G90 G54 X.5 Y0. S7500 M3 M8 M31 G43 H1 Z3.5 G98 G81 X.5 Y0. Z1.17 R1.35 F4. X.9 X1.3 X1.7 Z-.585 A-120. R9999. <------------This would be a crash!!! X1.3 X.9 X.5 X1.7 A-240. X1.3 X.9 X.5 G80 M5 M9 G91 G0 G28 Z0. G28 A0. G28 Y0. A0. M30 % And I also don't know why it is outputting an R value as well. This is using Rotary Axis positioning. I have a little experience editing posts, but this one is beyond me. This is using X3. Everything seemed to work fine in X2 MR2. Thanks for any help.

Fixed it. In the lead in/out page , the sweep of the arc was set to 0.0. I changed it to 90.0, like the contour page, and SHAZAM!!! Thanks for your help.