alancopp
-
Posts
21 -
Joined
-
Last visited
alancopp's Achievements
Newbie (1/14)
2
Reputation
-
So the only fix for this problem is to shut Mastercam down and restart it. What a PITA.
-
I am having this same issue. How can I fix it.
-
But the spindle still turns.
-
Spindle Taper Grinding
alancopp replied to Josh Kinney -Elite Engineering's topic in Machining, Tools, Cutting & Probing
SGS Did the spindles at 2 of the shops I have worked at. Turned out just like new. -
Would it work to set the amount of peck in the tool parameters. And then set '' Use tool's step ,peck and coolant " in Machine Group Properties tool settings tab.
-
If you programmed the right feeds & speeds, IPM or IPR doesn't matter. If the rpm gets slowed down the feed does also to maintain the correct chip load.
-
Thanks for the work around. That helps.
-
There are to many columns, I can't read the dia. column without moving the edge EVERY time .
-
Is there a solution for this?
-
I was afraid that was the answer. That would be a good thing to change with X7.
-
I am cutting a die cavity and would like to start on the bottom and cut up. Is there a setting that would allow me to do that with Surface High Speed Hybrid toolpath. We have X6 MU2.
-
Import all machine groups and tool paths
alancopp replied to Thee Rickster ™'s topic in Industrial Forum
You could copy the original file with a new name. Then delete all the geometry and merge your new mold geometry into that file with the ops. -
How do I keep the Ribbon Bar from moving around. Each time I select Trim,create circle,create line,etc. the ribbon bar moves further down the screen. I do not want to waste space on the tool bar by locking the ribbon bar there. We are running X6 MU2,on Win 7.
-
How do I keep the Ribbon Bar from moving around. Each time I select Trim,create circle,create line,etc. the ribbon bar moves further down the screen. I do not want to waste space on the tool bar by locking the ribbon bar there. We are running X6 MU2,on Win 7.
-
How do I keep the Ribbon Bar from moving around. Each time I select Trim,create circle,create line,etc. the ribbon bar moves further down the screen. I do not want to waste space on the tool bar by locking the ribbon bar there. We are running X6 MU2,on Win 7.
