Tony35
-
Posts
1,154 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Tony35
-
Try N3 IF[#6EQ79.]GOTO41 I always use decimals for macros
-
No issues with 8.0 here...yet anyway
-
Windows Explorer left pane shortcuts (Win7) missing
Tony35 replied to Thad's topic in Industrial Forum
I only see the MC shortcuts in MC open They are not there in explorer -
I second the Makino a71 Makinos are very nice machines
-
Yes this is an issue and CNC knows about it
-
Yes make sure you save to defaults or it will be back on
-
Vericut goes to level 3987 on my system
-
im using "applook 7" also
-
i run gradient start 255 end 123
-
its a parameter you can flip on
-
G93 is an option
-
Did you know Mastercam has "hidden" 5-axis toolpaths?
Tony35 replied to Colin Gilchrist's topic in Industrial Forum
thanks for pointing this out Colin -
yes i am probing the parts i have the center and top of the fixture set at WCS top it ran thru vericut fine we will soon find out
-
so what do you if you have multi-load fixture say 6 up load?
-
just remember to have no extension on the M198 file save it on the card as O1234 to save with no extension, save as "O1234" use the quotations and it wont save the file extension
-
i checked if it was in read only didnt see anything closed MC and could open it
-
i just got the warning tool database locked closed it and re-opened it still tells me its locked any ideas on this one
-
yes i have seen this i select delete tools so i dont get duplicates all the tools for the job are there
-
set the chain at the bottom of the feature for incremental turn on depth cuts with your taper angle filled in ( make sure the depth cut is deeper than the feature you are cutting) then set depth to incremental and put in what ever value past your chain you need
-
Help improve Mastercam toolpaths
Tony35 replied to Mastercam User Experience's topic in Industrial Forum
done -
i cant use the most recent list after about 6+ times MC crashes
-
i never had any problems on our older 18i using G5P10000 i use it all the time
-
no, waste of memory not needed if the operator needs to pick up somewhere he will just add the N block
-
yes but only on tool changes
-
yes it will chew up memory in a hurry
