Thanks for responding Colin, I downloaded the post off of the Tech Exchange, it works fine i'm just trying to figure out how to add the tool info. Your first suggestion doesnt show up in my post but thank you for your help. Generic Okuma 4X Mill.mcam-content

Hello! I am currently using Generic Okuma 4x Mill and it does not have the tool_info. I was wondering if i could get some help in adding it into my post processor. Attached is a screen shot from MPFAN. Any help would be appreciated. Thank you

Hi everyone, can someone tell me how modify mpmaster post? My comment is "FINISH PROFILE CONTOUR" and it shows up in N15 but i want to show up in N25 right next to the FLAT ENDMILL. I would like it to look like: T1 M06 (1/2 FLAT ENDMILL FINISH PROFILE CONTOUR) any help is appreciated.

could somebody explain to me how misc values work? I have a trouble with this issue ,it make crazy motion in my router 5 axis. In the picture attached i put a red box around the value that i need to modify but i don't know how to do it. i appreacte any help.

hi guys, I need to know if there is a way for the rotation on the 4th axis to be CW ,but for the G code to still be positive?.I have attachedthe program along with pic.I;m using a generic haas 4 axis vnc. thx TEST 4 AXIS.MCX-7

Ok Crazy^Millman, I will.thanks

Hi Crazy^Millman Ive tried to use it but theres alot of lines that need to be chnaged and alot of codes that the machine doesnt recognize, basically it would be alot of editing manually. Thats why i looked for someone who can show me how to modify it.

Hello everyone, Today i updated my fadal post processor (version 9.1 to x6), for some reason the lines in the picture showed, are all on one line on the x6 version, but on the 9.1 version they are on two lines. If i run the machine on the x6 version it will crash. My question is if someone can help turn the one line into two lines like the 9.1 version on my post processor. Any help is appreciated.

hi guys, Could someone tell me if its possible to rotate my 4-axis (thats on the x axis) to the y-axis if so, is it A or B-axis, do i need to change something in my post or my settings (i am using MILL DEFAULT post) Thanks in advance.

thx kccadcam, it has been fixed.

I dont think so,check the front view and run backplot you will see the shape.

yeah but I dont Know why in the part look like egg.

hi guys,.. could one of you please do this program please,Idid it but the holes(0.394") come out an egg shape. thx guys. TUBING PART-4 [email protected]

Hello I am working on getting the generic bridgeport post to work properly with a Bridgeport Torqcut 30 for mastercam X5... THX.

Hi everyone, Does anyne know how to modify a post processor to control fanuc 10T , which where the X is negitive . Thank you