Thad
-
Posts
8,914 -
Joined
-
Last visited
-
Days Won
17
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Thad
-
I did. Just some clarification... The screen shot above is what I used to click on in X9. That popup is from clicking Planes at the bottom of the screen. In 2023, I click on CPLANE at the bottom of the screen but selecting Front there sets the CPlane to the original part Front, not the Front of the current plane. Does that help?
-
Say that I create a custom plane. Then I want to create some geometry from the front of that custom plane. In version X9 and earlier, I would click Planes at the bottom of the screen, select Front, and it made the front OF THE CURRENT PLANE the Cplane. In 2023, it makes the original Front plane the Cplane. How do I access the old functionality? I recently updated from X9 to 2023 so I'm just now seeing this. Am I missing a check box somewhere? Thank you.
-
Inventor to Mastercam no solids capability
Thad replied to ETC Don's topic in Machining, Tools, Cutting & Probing
I was using X6 with solids within the last year (guessing). -
It's probably a better idea to compliment @byte on his effort and ingenuity than to be a smart@ss. Thanks for sharing, byte! There's no telling how many old users who didn't participate in the feedback program, or new users from the past decade that might find this useful.
-
Where is the file that saves the Context Menu? (Right Mouse Click)
Thad replied to BilKo Tool's topic in Industrial Forum
File-Convert-Migration Wizard -
I don't recall how I did it in X9, but I did. I just recently updated from X9 to 2023.
-
My ears were itching. See below for a link to A Form Filler.
-
Is there a way to do it? Thanks.
-
I'm still using X9 but isn't that what the .workspace file does? It remembers the screen layout?
-
Maybe because this discussion is a year and a half old?
-
Yes. It will check/uncheck checkboxes. It will click OK, Yes, No, Cancel, etc buttons. The list goes on.
-
I've said it before and I'll say it again. A Form Filler is your friend.
-
Best wishes Aaron! I always enjoy reading what you have to say here, even if the topic isn't something I use.
-
Just send a little chin music their way if they start acting up.
-
I put the solid on a layer all by itself and only turn it on when I need it. I do simple parts so I work mostly with wireframe. Or use quick mask wireframe, then Alt+E and you'll only have wireframe on the screen.
-
If you share the file with us, we can probably tell you what the stupid problem is.
-
I see. I thought it was a MC thing.
-
What is Classic Shell?
-
24.5?
-
Ah, I see. I guess we shouldn't hold our breath.
-
Sharing the file with us would be a good way to get help.
-
Or leave your remaining solid (after the trim) in two separate pieces. Just a guess without seeing it. Posting a file is always best.
-
I've seen this happen a few times on our Fadals. I believe (It's been MANY years) we narrowed it down to using R for radius instead of IJK. We switched to IJK and never saw it again.
-
No way. The guys will just end up fighting over politics and before you know it, they'll have to shut the whole OT section down. It'll never work!
