Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I don't have a high-end video card and got around this by disabling hardware acceleration. In 2020, that option was moved from the Advanced Configuration to the Mastercam Launcher.
Company name of course. I found the .dxf export but it created a 21MB file. I have a ticket in with out reseller and will await their response about that.
Oh so it's my fault huh? Thanks Ron!. Chuck Cook did mention that we should have a 5° tilt on the table, but what does he know....lol! You should see the Vericut singularity, fun stuff.
Cannot lock the C-Axis, it is a Swarf Toolpath but it acts dumb on the corners. Running on a Mazak 730-5X A/C Trunnion. Not sure what "device" but I am going with M.A.R.S!
This works, https://www.dropbox.com/s/yf1f24epmubsfqg/ModuleWorks_-_Documentation.chm?dl=0
Remember to right-click --> properties --> unblock your file.
Guest,
I did this very same thing with the below settings. Someone told me this can be done with contour but I cannot figure it out.
-Will
UNDERCUT_CHFR.mcam
Has anyone else experienced having to send the machine home before G54.4 actually takes any effect? We have an AWEA FCV-620 that need this, otherwise, it gets lost and starts machining off the stock. Talk about dangerous !!!
Hi,
Do any of you have an idea or can point me to a resource to fill in the Fanuc 5-axis Machining Condition table. It is supposed to be developed by out Tool Builder, Yama Seikie has tried to configure our AWEA FCV-620 but failed in their many attempts at it. It has been nearly 9-months and the machine still jerks when changing direction and does not have a smooth motion at all.
See attached for clarification.
-Will
We don't want it to pick up and go, the machine would need to know where it is at. Every machine I have run so far is able to read through and restart mid-program. Seems to me that starting off at a tool change is a workaround being that there realy isn't a tool change at such location to begin with. The point I want to restart from is perhaps a spot where the operator wanted to check something or if a tool got dull towards the end of a 30 minute cycle.
Anyone ever experience G61.1 alarms during 5axis moves ?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.