Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

JOHNAKA

Verified Members
  • Posts

    45
  • Joined

  • Last visited

Recent Profile Visitors

954 profile views

JOHNAKA's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. yes slavecam. in x8 i use to get repaired nci, never stop mastercam from continue. but in x9 is will hang it.
  2. Hello folks. does anyone have this nci problem with x9. if so please share some information. This happen mostly in the multi axis contours, basically almost all the multi axis. esp when i use the transform to copy around. it says the nci calculating , and it is goes for ever, i mean if i have to leave it will take a month. so i have to shut down mastercam and reopen it, and when it is open some of the icons on the contour shows locked. Now it is happening every time i want to generate a 5 axis, or do anything with it. my boss stop the maintenance this year i was hoping i will update to m2017.and the problem will go away. didn't have this problem in x8 or before. Please if anybody had this before and know what to do . let me know. it is getting very frustrated, when u work for 30 minutes and you forget to save, and boom this happen and i had to close MasterCard and reopen it, lose the work , and than again and again.
  3. HI all x9 transform posting is so slow, when using nci. it takes for ever, every time it happen need to shut mastercam and restart again, and even that don't solve the problem, need to use geometry in the transform to get it, does any one have this problem. or is there a work around it.? Thanks John
  4. Hi all Does anybody know why the solid for hass trunnion tables that come with mastercam for the 5 axis machines is not solid anymore, it rather mesh like STL, if so can it be fix please thanks in advance. Sincerly John
  5. Yes msl, i found your posting on the post forum. thank you very much
  6. what i have right now is this ( primary B rotatry) rotaxis1$=vecy # zero rotdir1$= -vecx # direction ( secondary A tilt) rotaxis2$=vecz # zero rotdir2$=vecy # direction that's work fine for the table sit parallel with the X axis, but the new machine, the table sit parallel with the y AXIS should i leave the primary B alone and try to change the secondary direction only
  7. HI all My boss just bought Haasvf3syy with tr60y turnion table,. The table sit parallel with the y axis, i have tried to modified the 5 axis that come with mastercam, but no success, if any has this table with the configuration i would predicate any help sincerly John
  8. K2csq7 they way u mirror u surfaces made the swarf confused, directions wise, you went from climb to conventional if you changed to conventional it will work fine, i would try to mirror the tool path instead,
  9. i would rough it out an leave .01 and heat treated and comes again and finish it. it is too hard to mill at the hardness. well for now u need some special tools
  10. it is all in the feed rate. haas cant take more than 120 ipm. depend on your machine setting,
  11. we are right in the middle almost, it costs us 2200 to make
  12. thanks newbee, but honestly if you have the new stuff in mcx7, it wouldn't be that hard to program. i have done this in the old swarf, and it was a mess,but the new, im very impress with it.
  13. newbeee, how much u think this will cost you to make. ?

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...