Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Does anyone have a programming manual for this machine?
I have a buddy at another shop who trying to program for the tailstock/Quill.
Anyone have some G code for the tailstock?
Thanks
Thanks Guys,
If you can help out with the TEST-4.mcam (2021) file this would be greatly appreciated.
It may not be the same tool you use but can help with the overall process I'm trying to develop on Inco with ceramic inserts.
BBprecise
Greenleaf used to have a great section in their old catalogs showing how to prep edges for ceramics and best practices, don't know if they still do or not. If not let me know ad I'll send to 20+ pages I have.
Please send me info you can
Thanks for your help
Eric
TEST-4.mcam
Hello,
I asking for some help to better use ceramic inserts on a Lathe.
If you have experience on how to keep your inserts from chipping and lasting longer, please help me develop a better process.
It was recommend to me to chamfer or radius into and out of the cut.
I have included a TEST.mcam file.
I'm and roughing the ID in sections for chips and to check or change insert if needed.
My inserts are not lasting more than one section and is chipping.
Thanks
TEST.mcam
crazy^millman
Thanks for the input, I am in no way going to adjust or right code to the post.
What I'm looking for is G code of some customized drilling cycles that others have added their post.
crazy^millman
I work in Long Beach at the Virgin Orbit factory. That's is a good idea to reach out to our sister company.
Are you referring to David G. from Cad/Cam Consulting?
I'm not using the MT version and am not looking to add this myself, that's a job for In-House solutions.
Just looking to see want I could add to our post.
Thanks
Hello everyone.
I'm looking to add some functionality to some of Mastercam’s drilling cycles. My Drill/Peck - G83 and Tap - G84/G88/G384 cycles work perfectly, but I looking see what I could add/customize to my post that other have done to theirs.
Machine: DMG Mori NLX 2500 Lathe (C & Y Axis)
Please send me any customized drilling cycle code.
Thanks
Mark, I use canned facing for most programs with no problems. Without knowing your issues I can't tell what is wrong. Check out the file I created for canned facing.
Lathe Canned facing test.mcam
Lathe Canned facing test.nc
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.