GWB
Verified Members-
Posts
16 -
Joined
-
Last visited
GWB's Achievements
Newbie (1/14)
0
Reputation
-
Thanks for the help JP
-
Thank you for the help
-
I'm trying to dupe this toolpath in Mastercam X8, as in the photo. The wall is at a 3 degree draft, so using a 3 DEG tapered ball nose EM to do the tapered wall and the radius. The toolpath was made in Camworks and I'm lost how to do this in MC. I want to do Z steps as well as X steps. I have a photo of the CamWorks toolpath adjustment page for Pencil Mill,,,It allows you to adjust both Z and in this case, X Thanks for any ideas.
-
VERISURF TOOLS For MASTERCAM 2024
GWB replied to Verisurf - Ernie Husted's topic in Industrial Forum
thank you very much as always for this great add on I remember that there was a file that explained all the tools and how to use them Does this still exist for the X8 tools?? thanks George -
thanks for the info
-
Any info on above??? thanks
-
Thanks for the help we will put it on the list to try
-
Thank you sir I will try that The jerk motion happens when the tool lifts and moves to the start of another tool path..
-
Yes, the jerk is between cuts as the tool re-positions
-
-
w e give it a try
-
Think you are right..
-
When the X and y axis move to the next position for the next toolpath, the moves are very jerky, then the 5 axis moves become nice and smooth. It appears G94 has something to do with this. The machine is an older Haas VF3 with a new TR160 using MC X7 SP2. The cuts are both flow and Swarf. Line 1890 to 2620 runs fine than any XY or Z moves are jerky until line 2700 Guess maybe something in the post or a setting in the machine or controller settings in MC? HAAS stated this line should be a G93 not G94?? Pram 315 HSM is not installed on the VF3 ( the above sample is the same when ever the tool moves to the next toopath) Thanks for any ideas Please advise if any other info is needed thanks N1890 G93 X-3.9688 Y-4.0773 Z.4924 B-24.768 A8.466 F391.39 N1900 X-4.0066 Y-4.0075 Z.5045 B-23.881 A8.519 F391.39 N1910 X-4.0489 Y-3.8973 Z.5278 B-22.554 A8.574 F193.05 N1920 X-4.1054 Y-3.8019 Z.549 B-21.328 A8.552 F388. N1930 X-4.16 Y-3.7054 Z.57 B-20.096 A8.533 F388. N1940 X-4.2045 Y-3.5817 Z.606 B-18.62 A8.428 F197.64 N1950 X-4.134 Y-3.6437 Z.5965 B-19.54 A8.5 F620.23 N1960 X-4.0635 Y-3.7033 Z.587 B-20.445 A8.575 F620.23 N1970 X-3.9933 Y-3.7605 Z.5776 B-21.334 A8.651 F620.23 N1980 X-3.9155 Y-3.8325 Z.5599 B-22.414 A8.799 F999.99 N1990 X-3.8389 Y-3.9004 Z.5422 B-23.459 A8.949 F999.99 N2000 X-3.7635 Y-3.9645 Z.5245 B-24.469 A9.102 F999.99 N2010 X-3.6892 Y-4.025 Z.507 B-25.446 A9.258 F999.99 N2020 X-3.6163 Y-4.082 Z.4894 B-26.391 A9.417 F999.99 N2030 X-3.6674 Y-4.0156 Z.4925 B-25.42 A9.608 F556.25 N2040 X-3.7146 Y-3.9512 Z.4955 B-24.486 A9.801 F556.25 N2050 X-3.7583 Y-3.8887 Z.4985 B-23.589 A9.997 F556.25 N2060 X-3.8179 Y-3.8188 Z.5145 B-22.565 A9.975 F999.99 N2070 X-3.8764 Y-3.7477 Z.5304 B-21.537 A9.955 F999.99 N2080 X-3.9338 Y-3.6755 Z.5462 B-20.506 A9.939 F999.99 N2090 X-3.99 Y-3.6022 Z.562 B-19.471 A9.926 F999.99 N2100 X-4.0449 Y-3.528 Z.5778 B-18.434 A9.916 F999.99 N2110 X-4.0985 Y-3.4527 Z.5935 B-17.395 A9.909 F999.99 N2120 X-4.1507 Y-3.3767 Z.6092 B-16.355 A9.906 F999.99 N2130 X-4.189 Y-3.2913 Z.6304 B-15.262 A9.934 F397.7 N2140 X-4.2251 Y-3.2062 Z.6514 B-14.176 A9.965 F397.7 N2150 X-4.2247 Y-3.1345 Z.6736 B-13.341 A10.095 F201.47 N2160 X-4.2437 Y-3.0705 Z.6912 B-12.535 A10.142 F399.54 N2170 X-4.2612 Y-3.0071 Z.7088 B-11.737 A10.19 F399.54 N2180 X-4.277 Y-2.9451 Z.7274 B-10.959 A10.217 F401.55 N2190 X-4.2916 Y-2.8836 Z.746 B-10.186 A10.247 F401.55 N2200 X-4.2332 Y-2.8991 Z.7545 B-10.499 A10.397 F204.02 N2210 X-4.1603 Y-2.9386 Z.753 B-11.123 A10.679 F204.35 N2220 X-4.1453 Y-2.8909 Z.768 B-10.523 A10.979 F201.84 N2230 X-4.1677 Y-2.7839 Z.7968 B-9.079 A11.258 F199.92 N2240 X-4.1833 Y-2.7212 Z.8147 B-8.23 A11.376 F398.06 N2250 X-4.197 Y-2.66 Z.8325 B-7.397 A11.496 F398.06 N2260 X-4.2008 Y-2.5755 Z.8617 B-6.251 A11.728 F199.68 N2270 X-4.1816 Y-2.5306 Z.8831 B-5.64 A11.978 F200.41 N2280 X-4.1496 Y-2.5101 Z.8986 B-5.351 A12.265 F200.77 N2290 X-4.1164 Y-2.4928 Z.9127 B-5.091 A12.589 F200.55 N2300 X-4.0823 Y-2.4784 Z.9255 B-4.856 A12.948 F200.3 N2310 X-4.0447 Y-2.4715 Z.9357 B-4.711 A13.346 F200.19 N2320 X-4.0055 Y-2.469 Z.9437 B-4.615 A13.788 F200.01 N2330 X-3.9678 Y-2.4649 Z.9511 B-4.48 A14.27 F199.72 N2340 X-3.9341 Y-2.4545 Z.9595 B-4.238 A14.781 F199.28 N2350 X-3.8937 Y-2.4574 Z.9638 B-4.181 A15.323 F199.54 N2360 X-3.8547 Y-2.4591 Z.9673 B-4.092 A15.903 F199.55 N2370 X-3.8325 Y-2.4308 Z.9801 B-3.531 A16.478 F198.61 N2380 X-3.8186 Y-2.3865 Z1.0001 B-2.716 A17.015 F198.11 N2390 X-3.7976 Y-2.3542 Z1.0189 B-2.085 A17.507 F198.8 N2400 X-3.7604 Y-2.3529 Z1.0288 B-1.937 A17.988 F200.35 N2410 X-3.7162 Y-2.3659 Z1.0336 B-2.007 A18.489 F201.14 N2420 X-3.6845 Y-2.356 Z1.0459 B-1.693 A18.998 F200.18 N2430 X-3.6565 Y-2.3388 Z1.0624 B-1.258 A19.475 F200.29 N2440 X-3.6202 Y-2.3378 Z1.0739 B-1.087 A19.934 F201.81 N2450 X-3.5666 Y-2.3709 Z1.0727 B-1.48 A20.405 F204.41 N2460 X-3.516 Y-2.4 Z1.0706 B-1.785 A20.941 F204.78 N2470 X-3.4806 Y-2.4016 Z1.0787 B-1.605 A21.481 F203.13 N2480 X-3.4461 Y-2.4015 Z1.0883 B-1.383 A22.008 F202.49 N2490 X-3.4094 Y-2.4051 Z1.0974 B-1.225 A22.506 F202.24 N2500 X-3.3627 Y-2.4266 Z1.0994 B-1.389 A22.994 F202.93 N2510 X-3.3034 Y-2.4701 Z1.0907 B-1.959 A23.507 F203.97 N2520 X-3.237 Y-2.5259 Z1.0733 B-2.749 A24.098 F204.28 N2530 X-3.1774 Y-2.5704 Z1.0572 B-3.308 A24.773 F202.76 N2540 X-3.1309 Y-2.5942 Z1.0484 B-3.45 A25.491 F200.51 N2550 X-3.0882 Y-2.6115 Z1.0425 B-3.46 A26.204 F199.41 N2560 X-3.0419 Y-2.6339 Z1.0337 B-3.581 A26.909 F199.74 N2570 X-2.9961 Y-2.6555 Z1.0249 B-3.688 A27.614 F200.03 N2580 X-2.9506 Y-2.6764 Z1.0163 B-3.783 A28.311 F200.26 N2590 X-2.9057 Y-2.6961 Z1.008 B-3.857 A29.001 F200.47 N2600 X-2.8611 Y-2.7153 Z1.0001 B-3.922 A29.677 F200.74 N2610 X-2.8151 Y-2.736 Z.9912 B-4.029 A30.34 F201.08 N2620 G94 X-2.8273 Y-2.8074 F10. N2630 X-2.8476 Y-2.8769 N2640 X-2.8758 Y-2.9435 N2650 X-2.9116 Y-3.0065 N2660 X-2.9544 Y-3.0649 N2670 X-3.0036 Y-3.118 N2680 X-3.0587 Y-3.165 N2690 X-3.1189 Y-3.2053 N2700 G0 Z4.9912
-
Thank you all very much JParis, I will Thanks
-
Thanks JAY It is one of the files you can't send out you know how that is! do you have any videos of setting a part for Swarf I have access to your Eapp site? Checked your YouTube but did not find one This would be for a edge trim.. With swarf I don't know what to pick and have a problem with tool angle crash
Join us!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.