Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Yes sometimes you have to click in the ops window to activate it and sometimes you don't,
and that goes for the graphics window also! I do have my ops manager undocked also with dual monitors.
Phil under settings customize use the tab for
drop down / right mouse button menu then you can right click in the left hand side menu it will give you the option to make a drop down menu.
Tom
Randy,
If I understand your problem tou need to make your tip chain deeper so the to don't cut into the first bore [take the top chain and offset it
in and down 10° by 2 deep]
Tom
Is there A way to set up your levels and save to file , then ever time you start A job you would just inport the levels so they are always be the same. Thank you
We are looking at getting A used one for machining Al. The one we are looking at is A 1995
X 30, Y 20, Z 20, travel, 6000 RPM Spindle 21 tool changer, 10 HP spindle motor. $27,500.
iS It A deal or not.
Thank You for any help.
Tom
We have three seats and it is faster at the machine and much better finishes but we only mahine al. We don't see any slower calculating times it is almost always faster.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.