didn't mean to come off with attitude but this is not a user friendly setup in my opinion. end of story.

Not one download in 1 1/2 days, so the answer to my original post is no uses this Productivity+ or likes it. End of post. TY all. I can long hand all our pre and final on machine probing way quicker. Now to be fair I dont have custom macro turned on with this 90 day trial which might be the trick to this whole thing. So they should give the custom macro with the trial. Whatever.

i have searched and searched for a video or some kind of help on this and nothing.

Can anyone please show me how to probe the 2.4042 dim with productivity+ . only one touch per surface. it keeps probing places where there isnt even any lines. PROBES.mcx-9

yeah i thought so also

yes since one program we use hand written probing then to start using this P+ we would have to recalibrate many times a month not liking it or im missing something. i did get the calibration partof it to post but still not sold on the whole deal

i feel i have the proper macros in the common folder and i have posted a simple probe bore but the HAAS would throw alarms about incorrect calibration mode so thats when i started having the calibration issues. im on a 90 day trial and not starting out so good

Anyone liking the productivity+ for HAAS. i feel like i can longhand pre and post part probe programming alot easier than what ive seen in the few days I have been playing with it. And I am having no luck with the calibration part of it. keeps telling me no toolpath found but i can see it probe a ring in verify. Not impressed at all.

I have the final program the way you have it there it's just on the one I sent in here on simulator it looks right but post is not right. Weird next time I talk to seller I'll see what he says. Thank you.

Can anyone explain why its posting Z moves. im using mppostability_haas_umc-750.pst TUBE10A.mcx-9

I am running x7 and im getting no output of the feed rate or plunge rate. I am getting spindle rpm and est. machining time so it is seeing feed rates obviously but not outputting to report. could it be that im x7 and this was written in x9.

the lollipop wants to come in and out of the hole near the end of cycle way off center and gouge the hole. never had much luck with this and did work around well this job is radius only and cant get proper toolpath. any help and or explanation would be greatly appreciated. thank you in advance.7 MM X .0197 AND 8MM X .0197 LOLLIPOP.MCX-7 hope this attachment works

im hearing you can get 12000 rpm out of the HAAS UMC750 even though it comes with only 8000 rpm. does anyone know if this is true and that it is enabled in the parameters or some such. ty in advance.

yes the different width letters make it dificult to center under each line the only sugestion i got elsewhere was to make 360 diferent files with each number centered gotta be an easier way

i need to etch a scale at 1 in increments and getting the numbers below the inch lines is a real hassel any suggestions the scale is 360 inches long